-
nbd in knoppix 6.7.1 (boot: knoppix64)
I would like to mount a kvm qcow2 image (Windows XP) via nbd, but 'modprobe nbd' returns nil. Nothing obvious (to me ) in debian package repository for the missing kernel module. Pointers (instructions, reading materials) on how to achieve the image mount would be greatly appreciated. thanks in advance.
-
Senior Member
registered user
If you look inside the the kernel's configuration file, you will see that the support for network block devices was already compiled into the Knoppix kernel. There is no need to load a kernel module using modprobe. The device names are /dev/nbd[0..15].
I do not use network block devices myself, but I found a short tutorial on the Debian Administration web site: Working with network block devices
-
Thank you very much Klaus for the details on nbd, and also the tutorial (which would help bridge the gaps in my knowledge and get me going). Very much appreciated.
-
Continuing on getting nbd to work in Knoppix 6.7.1 (boot:knoppix64) - now with the knowledge that kernel has nbd -
the nbd server appears to start OK ("kvm-nbd -c /dev/nbd0 xp-disk.qcow2"), and fdisk shows partition 1 (as expected for the disk image xp-disk.qcow2). however, the device fails to mount ~ "mount /dev/nbd0p1 /mnt/xp-disk" gives the error message "mount: special device /dev/nbd0p1 does not exist").
A quick search points to the max_part parameter for nbd devices: "cat /sys/module/nbd/parameters/max_part" gives 0 (thus the failed mount). Had nbd been compiled as a module, it is said that "rmmod nbd" followed by "modprobe nbd max_part=16" would re-set the max_part parameter for mount to proceed. Given that nbd is compiled into the kernel in x86_64 in Knoppix 6.7.1, is it possible to change the parameter, and how? (it couldn't be editing directly the file in /sys/module/nbd/parameters/ - could it?)
-
Senior Member
registered user
Originally Posted by
boryeu.mao
Had nbd been compiled as a module, it is said that "rmmod nbd" followed by "modprobe nbd max_part=16" would re-set the max_part parameter for mount to proceed. Given that nbd is compiled into the kernel in x86_64 in Knoppix 6.7.1, is it possible to change the parameter, and how?
You can set the parameter using this "nbd.max_part=16", and this can be specified when you are prompted at boot parameter (in the exact same manner as you specify a cheatcode ), or you can specify it inside the file /mnt-system/boot/syslinux/syslinux.cfg.
Have fun with nbd, though I haven't used it before !
-
Thanks much for the solution(s) - and the help in improving my knowledge on all things kernel. It makes sense to have to reboot since the parameter is meant for the kernel. My first encounter with nbd as well. PS - correcting myself, max_part ought to be 15 (and not 16).
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
ASUS H110M-R Motherboard Intel 6th/7th Gen LGA1151 DDR4 Micro-ATX i/o shield
$42.00
***NEW*** BCM RX67Q Gaming Motherboard | Intel Q67 2nd/3rd Gen. | LGA1155 | DDR3
$29.77
Gigabyte Z370P D3 ATX Z370 LGA1151 Motherboard (Support Intel 6/7th 8th 9th)
$59.99
***NEW*** BCM RX67Q mATX Gaming Motherboard Combo | Intel i5-3470 | 16GB DDR3
$49.77
MSI A320M-A PRO AM4 AMD A320 USB3.2 Gen1 Micro-ATX Motherboard
$46.99
Gigabyte GA-B75M-HD3 Intel LGA1155 DDR3 Desktop Motherboard MicroATX USB 3.0
$26.99
Asrock Z390 Phantom Gaming 4S/AC Wifi 8th/9th Gen Intel 1151 Motherboard Bulk
$47.61
Micro ATX Desktop Motherboard ASUS H110M-C LGA 1151
$29.95
BTC-S37 Mining Motherboard Kit /w SSD & Ram Preinstalled
$59.99
GIGABYTE Z690 AORUS Elite AX (LGA 1700/Intel 7690/WiFi 6) - Gaming Motherboard
$99.86