I have a Macbook Pro from 2009. I am attempting to recover data from a failing drive, and I also hope to install Linux for dual booting once I have recovered the data. The laptop has an NVIDIA GeForce 9600M GT video card, and Intel Core2 Duo T9800 @ 2.93 GHz processor.
Knoppix 6.7.1 fails to boot. It correctly identifies the graphics and sound cards, however it stalls during "System Setup" while "Starting DRM and Framebuffer Mode..." Interestingly, when I tried Knoppix 6.2.1, it boots just fine.
Any suggestions as to what may be causing this? Thanks for your help!
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST24000NM002H 24TB HDD Exos X24 HD 3.5 SATA 7200 Seagate Warranty
$399.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$79.99
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.99
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$79.99
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$24.11
Western Digital DC HC320 Ultrastar 8TB 7200RPM SATA HD, HUS728T8TALE6L4, 0B36404
$99.00