I have a Macbook Pro from 2009. I am attempting to recover data from a failing drive, and I also hope to install Linux for dual booting once I have recovered the data. The laptop has an NVIDIA GeForce 9600M GT video card, and Intel Core2 Duo T9800 @ 2.93 GHz processor.
Knoppix 6.7.1 fails to boot. It correctly identifies the graphics and sound cards, however it stalls during "System Setup" while "Starting DRM and Framebuffer Mode..." Interestingly, when I tried Knoppix 6.2.1, it boots just fine.
Any suggestions as to what may be causing this? Thanks for your help!
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
Seagate 10TB 7200RPM 12Gbps 3.5in SAS Hard Drive ST10000NM096
$79.99
Dell ST2000NX0403 2T SATA 2.5 inch 7.2K CK3MN server hard drive
$45.00
Toshiba 4TB, SATA 3, 3.5'' Internal Hard Drive (MG03ACA400)
$48.00
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.88
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$69.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
Western Digital WD10JUCT 1TB 2.5" SATA 3Gb/s 5400 RPM 16MB Laptop Hard Drive
$17.98
HGST 0F27352 10TB 3.5" SAS 7200 RPM 12Gb/s Hard Drive 100% #73 v
$65.00