I have a Macbook Pro from 2009. I am attempting to recover data from a failing drive, and I also hope to install Linux for dual booting once I have recovered the data. The laptop has an NVIDIA GeForce 9600M GT video card, and Intel Core2 Duo T9800 @ 2.93 GHz processor.
Knoppix 6.7.1 fails to boot. It correctly identifies the graphics and sound cards, however it stalls during "System Setup" while "Starting DRM and Framebuffer Mode..." Interestingly, when I tried Knoppix 6.2.1, it boots just fine.
Any suggestions as to what may be causing this? Thanks for your help!
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M640 Blade Server 2x Xeon Gold 5122 3.6GHz, No RAM, READ _
$402.38
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
HPE 863442-B21 ProLiant BL460c G10 Blade (2) Intel Xeon Silver CPUs NO HD/NO RAM
$319.00
HPE ProLiant BL460c Gen9 16-Core Blade 779803-S01 (2)CPU on board No RAM/No HDD
$89.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99