-
Senior Member
registered user
Daylight savings time
.
On 11/6/11, my Knoppix 6.7.1 LiveUSB seemed to require adding ntpdate to provide
the correct transition from daylight-savings to standard time via internet access to NTP.
The other settings which without ntpdate seemed all right for Eastern US time until
this Sunday were as follows:
My hardware clock is set to local time; in /etc/default/rcS, 'UTC=no' is set; and in
/mnt-system/boot/syslinux/syslinux.conf, kernel option is set to 'tz=America/New_York'.
I've not changed any of these settings, only added ntpdate via Synaptic.
I think I've found that booting up Windows 7 on the same computer after the time change
has occurred has the same effect, without requiring the addition of ntpdate.
-
I've not changed any of these settings, only added ntpdate via Synaptic.
Only installing ntpdate via synaptic is of no use.
You have to run ntpdate either manually or in a cron-job. And it is very important, which parameter you use for ntpdate.
In an earlier posting I mentioned, you will run in trouble with dualboot installation of Linux and Windows, if your BIOS clock isn't UTC.
-
Senior Member
registered user
Hi, Werner.
Nice to hear from you.
I was and am surprised at how compatible ntpdate is with Windows 7
with the configuration I have described.
If I were dual booting more often,
I might have imagined that ntpdate was unnecessary.
As it is the effective appearance is:
If Windows has 'updated the hardware clock', ntpdate does nothing;
If Windows hasn't 'updated the hardware clock', then ntpdate does so.
I know the Linux standard is UTC. I still prefer local time.
I think I now have identified all the pieces that go together
to make that happen consistently.
-
Which parameter do you use with "ntpdate" and how do you start it:
manually or via cron-job?
-
Senior Member
registered user
Hi, Werner.
I have just accepted the default /etc/default/ntpdate, which is:
Code:
# The settings in this file are used by the program ntpdate-debian, but not
# by the upstream program ntpdate.
# Set to "yes" to take the server list from /etc/ntp.conf, from package ntp,
# so you only have to keep it in one place.
NTPDATE_USE_NTP_CONF=yes
# List of NTP servers to use (Separate multiple servers with spaces.)
# Not used if NTPDATE_USE_NTP_CONF is yes.
NTPSERVERS="0.debian.pool.ntp.org 1.debian.pool.ntp.org 2.debian.pool.ntp.org 3.debian.pool.ntp.org"
# Additional options to pass to ntpdate
NTPOPTIONS=""
It may be noted that there is no file /etc/ntp.conf in my /etc.
knoppix@Microknoppix:~$ less /etc/services | grep ntp
nntp 119/tcp readnews untp # USENET News Transfer Protocol
ntp 123/tcp
ntp 123/udp # Network Time Protocol
nntps 563/tcp snntp # NNTP over SSL
nntps 563/udp snntp
knoppix@Microknoppix:~$
Also, I do NOT also have ntp itself installed.
Last edited by utu; 11-08-2011 at 09:20 PM.
-
Senior Member
registered user
ps: Werner, this may be what you are looking for:
/var/log/dpkg/info/ntpdate.conffiles:
/etc/network/if-up.d/ntpdate
/etc/logcheck/ignore.d.server/ntpdate
/etc/dhcp/dhclient-exit-hooks.d/ntpdate
/etc/default/ntpdate
There is indeed an executable file ntpdate in /etc/if-up.d,
and that's the way it seems to work: within one minute of
getting wifi on-line, a time correction is made.
-
Senior Member
registered user
I was having this usual problem of mine also setting up Mint 11 LXDE,
To cure the local time problem, per Mint forum:
sudo apt-get install gnome-time-admin, then
System Tools>Time>Zone>America/New_York, in my case.
This works on Mint 11; it's worth a try here.
-
Senior Member
registered user
ps
I've tried this via Synaptic and concluded that Knoppix
doesn't have enough gnome infrastructure to run gnome-time-admin, unfortunately.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell Precision 5810 Workstation Xeon E5-1650 6C 3.5GHz 16GB 500GB Win10 K2200
$115.94
Dell T7810 Workstation 1x E5-2603 v3 16GB RAM Nvidia QUADRO +cables
$120.00
HP Z230 Workstation Towers Xeon E3-1231 V3 3.20ghz 8GB Ram NO HDD
$39.96
GIGABYTE MB10-Datto Motherboard Xeon D-1521- SR2DF 2.40 GHz- Open Box
$139.05
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 Grade A Processor
$3.87
Genuine Intel Xeon E5-2680V4 2.40Ghz 14-Core 35MB LGA2011 CPU P/N: SR2N7
$14.99
Intel SR1XD Xeon E5-2699V3 2.30Ghz 18-Core Socket 2011 CPU Processor Haswell
$35.00
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$32.79
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
Matched Pair __ Intel Xeon Gold 6152 2.1Ghz 22-Core 140W CPU SR3B4
$204.95