-
Senior Member
registered user
Daylight savings time
.
On 11/6/11, my Knoppix 6.7.1 LiveUSB seemed to require adding ntpdate to provide
the correct transition from daylight-savings to standard time via internet access to NTP.
The other settings which without ntpdate seemed all right for Eastern US time until
this Sunday were as follows:
My hardware clock is set to local time; in /etc/default/rcS, 'UTC=no' is set; and in
/mnt-system/boot/syslinux/syslinux.conf, kernel option is set to 'tz=America/New_York'.
I've not changed any of these settings, only added ntpdate via Synaptic.
I think I've found that booting up Windows 7 on the same computer after the time change
has occurred has the same effect, without requiring the addition of ntpdate.
-
I've not changed any of these settings, only added ntpdate via Synaptic.
Only installing ntpdate via synaptic is of no use.
You have to run ntpdate either manually or in a cron-job. And it is very important, which parameter you use for ntpdate.
In an earlier posting I mentioned, you will run in trouble with dualboot installation of Linux and Windows, if your BIOS clock isn't UTC.
-
Senior Member
registered user
Hi, Werner.
Nice to hear from you.
I was and am surprised at how compatible ntpdate is with Windows 7
with the configuration I have described.
If I were dual booting more often,
I might have imagined that ntpdate was unnecessary.
As it is the effective appearance is:
If Windows has 'updated the hardware clock', ntpdate does nothing;
If Windows hasn't 'updated the hardware clock', then ntpdate does so.
I know the Linux standard is UTC. I still prefer local time.
I think I now have identified all the pieces that go together
to make that happen consistently.
-
Which parameter do you use with "ntpdate" and how do you start it:
manually or via cron-job?
-
Senior Member
registered user
Hi, Werner.
I have just accepted the default /etc/default/ntpdate, which is:
Code:
# The settings in this file are used by the program ntpdate-debian, but not
# by the upstream program ntpdate.
# Set to "yes" to take the server list from /etc/ntp.conf, from package ntp,
# so you only have to keep it in one place.
NTPDATE_USE_NTP_CONF=yes
# List of NTP servers to use (Separate multiple servers with spaces.)
# Not used if NTPDATE_USE_NTP_CONF is yes.
NTPSERVERS="0.debian.pool.ntp.org 1.debian.pool.ntp.org 2.debian.pool.ntp.org 3.debian.pool.ntp.org"
# Additional options to pass to ntpdate
NTPOPTIONS=""
It may be noted that there is no file /etc/ntp.conf in my /etc.
knoppix@Microknoppix:~$ less /etc/services | grep ntp
nntp 119/tcp readnews untp # USENET News Transfer Protocol
ntp 123/tcp
ntp 123/udp # Network Time Protocol
nntps 563/tcp snntp # NNTP over SSL
nntps 563/udp snntp
knoppix@Microknoppix:~$
Also, I do NOT also have ntp itself installed.
Last edited by utu; 11-08-2011 at 09:20 PM.
-
Senior Member
registered user
ps: Werner, this may be what you are looking for:
/var/log/dpkg/info/ntpdate.conffiles:
/etc/network/if-up.d/ntpdate
/etc/logcheck/ignore.d.server/ntpdate
/etc/dhcp/dhclient-exit-hooks.d/ntpdate
/etc/default/ntpdate
There is indeed an executable file ntpdate in /etc/if-up.d,
and that's the way it seems to work: within one minute of
getting wifi on-line, a time correction is made.
-
Senior Member
registered user
I was having this usual problem of mine also setting up Mint 11 LXDE,
To cure the local time problem, per Mint forum:
sudo apt-get install gnome-time-admin, then
System Tools>Time>Zone>America/New_York, in my case.
This works on Mint 11; it's worth a try here.
-
Senior Member
registered user
ps
I've tried this via Synaptic and concluded that Knoppix
doesn't have enough gnome infrastructure to run gnome-time-admin, unfortunately.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45 picture](/store/img/g/1hMAAOSw8hVl8bKq/s-l225/DELL-PowerEdge-R430-8SFF-2x-E5-2680v4-2-4GHz-28-Co.jpg)
DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$226.00
![Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD picture](/store/img/g/vx0AAOSwvwFlExVY/s-l225/Dell-PowerEdge-R630-Server-2x-E5-2680-V4-28-Cores-.jpg)
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
![DELL PowerEdge R730 Server 2x E5-2680v3 2.5GHz =24 Cores 128GB H730 4xRJ45 picture](/store/img/g/O2MAAOSwRtNkh97Y/s-l225/DELL-PowerEdge-R730-Server-2x-E5-2680v3-2-5GHz-24-.jpg)
DELL PowerEdge R730 Server 2x E5-2680v3 2.5GHz =24 Cores 128GB H730 4xRJ45
$345.00
![1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE picture](/store/img/g/7KoAAOSwephiKTf4/s-l225/1U-Supermicro-Server-10-Bay-2x-Intel-Xeon-3-3Ghz-8.jpg)
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
![Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330 picture](/store/img/g/ZD0AAOSwm41mOZYw/s-l225/Dell-PowerEdge-R630-Server-2x-E5-2640v3-2-60Ghz-16.jpg)
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
![Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays picture](/store/img/g/GAcAAOSw9Q1mGSZW/s-l225/Dell-Poweredge-R630-Server-2x-E5-2620-V4-16-Cores-.jpg)
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
![Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD picture](/store/img/g/Fk4AAOSwDDplpAyL/s-l225/Dell-PowerEdge-R620-Server-2x-E5-2660-v2-2-2GHz-20.jpg)
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$139.99
![Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD  picture](/store/img/g/yAwAAOSwdyNlgQ8d/s-l225/Dell-PowerEdge-R720xd-26HDD-300gb-2-5-inch-E5-2697.jpg)
Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD 
$180.00
![Cisco UCS C240 M4 2U Server w/ 2x E5-2680v4, NO RAM picture](/store/img/g/Je8AAOSwIcdmTgJF/s-l225/Cisco-UCS-C240-M4-2U-Server-w-2x-E5-2680v4-NO-RAM.jpg)
Cisco UCS C240 M4 2U Server w/ 2x E5-2680v4, NO RAM
$49.99
![Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config picture](/store/img/g/CdkAAOSwY0BmYMoF/s-l225/Dell-Poweredge-R730xd-LFF-14-Bay-2U-Server-Choose-.jpg)
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$489.99