-
Senior Member
registered user
Daylight savings time
.
On 11/6/11, my Knoppix 6.7.1 LiveUSB seemed to require adding ntpdate to provide
the correct transition from daylight-savings to standard time via internet access to NTP.
The other settings which without ntpdate seemed all right for Eastern US time until
this Sunday were as follows:
My hardware clock is set to local time; in /etc/default/rcS, 'UTC=no' is set; and in
/mnt-system/boot/syslinux/syslinux.conf, kernel option is set to 'tz=America/New_York'.
I've not changed any of these settings, only added ntpdate via Synaptic.
I think I've found that booting up Windows 7 on the same computer after the time change
has occurred has the same effect, without requiring the addition of ntpdate.
-
I've not changed any of these settings, only added ntpdate via Synaptic.
Only installing ntpdate via synaptic is of no use.
You have to run ntpdate either manually or in a cron-job. And it is very important, which parameter you use for ntpdate.
In an earlier posting I mentioned, you will run in trouble with dualboot installation of Linux and Windows, if your BIOS clock isn't UTC.
-
Senior Member
registered user
Hi, Werner.
Nice to hear from you.
I was and am surprised at how compatible ntpdate is with Windows 7
with the configuration I have described.
If I were dual booting more often,
I might have imagined that ntpdate was unnecessary.
As it is the effective appearance is:
If Windows has 'updated the hardware clock', ntpdate does nothing;
If Windows hasn't 'updated the hardware clock', then ntpdate does so.
I know the Linux standard is UTC. I still prefer local time.
I think I now have identified all the pieces that go together
to make that happen consistently.
-
Which parameter do you use with "ntpdate" and how do you start it:
manually or via cron-job?
-
Senior Member
registered user
Hi, Werner.
I have just accepted the default /etc/default/ntpdate, which is:
Code:
# The settings in this file are used by the program ntpdate-debian, but not
# by the upstream program ntpdate.
# Set to "yes" to take the server list from /etc/ntp.conf, from package ntp,
# so you only have to keep it in one place.
NTPDATE_USE_NTP_CONF=yes
# List of NTP servers to use (Separate multiple servers with spaces.)
# Not used if NTPDATE_USE_NTP_CONF is yes.
NTPSERVERS="0.debian.pool.ntp.org 1.debian.pool.ntp.org 2.debian.pool.ntp.org 3.debian.pool.ntp.org"
# Additional options to pass to ntpdate
NTPOPTIONS=""
It may be noted that there is no file /etc/ntp.conf in my /etc.
knoppix@Microknoppix:~$ less /etc/services | grep ntp
nntp 119/tcp readnews untp # USENET News Transfer Protocol
ntp 123/tcp
ntp 123/udp # Network Time Protocol
nntps 563/tcp snntp # NNTP over SSL
nntps 563/udp snntp
knoppix@Microknoppix:~$
Also, I do NOT also have ntp itself installed.
Last edited by utu; 11-08-2011 at 09:20 PM.
-
Senior Member
registered user
ps: Werner, this may be what you are looking for:
/var/log/dpkg/info/ntpdate.conffiles:
/etc/network/if-up.d/ntpdate
/etc/logcheck/ignore.d.server/ntpdate
/etc/dhcp/dhclient-exit-hooks.d/ntpdate
/etc/default/ntpdate
There is indeed an executable file ntpdate in /etc/if-up.d,
and that's the way it seems to work: within one minute of
getting wifi on-line, a time correction is made.
-
Senior Member
registered user
I was having this usual problem of mine also setting up Mint 11 LXDE,
To cure the local time problem, per Mint forum:
sudo apt-get install gnome-time-admin, then
System Tools>Time>Zone>America/New_York, in my case.
This works on Mint 11; it's worth a try here.
-
Senior Member
registered user
ps
I've tried this via Synaptic and concluded that Knoppix
doesn't have enough gnome infrastructure to run gnome-time-admin, unfortunately.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Cisco SG300-52-Port Gigabit Managed Rack Mountable Network Switch picture](/store/img/g/sOIAAOSwtV1mUVhk/s-l225/Cisco-SG300-52-Port-Gigabit-Managed-Rack-Mountable.jpg)
Cisco SG300-52-Port Gigabit Managed Rack Mountable Network Switch
$44.95
![ARUBA J9772A 2530-48G PoE+ 48 PORT ETHERNET SWITCH W/ RACK EARS J9772-60301 picture](/store/img/g/J0AAAOSwSiVlu-xI/s-l225/ARUBA-J9772A-2530-48G-PoE-48-PORT-ETHERNET-SWITCH-.jpg)
ARUBA J9772A 2530-48G PoE+ 48 PORT ETHERNET SWITCH W/ RACK EARS J9772-60301
$140.23
![Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED picture](/store/img/g/kjQAAOSwNkhj0o7Y/s-l225/Fortinet-FortiSwitch-FS-124D-POE-24-Port-Gigabit-E.jpg)
Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED
$99.97
![HPE ARUBA 2530-24G J9773A PoE+ 24-PORT GIGABIT ETHERNET SWITCH J9773-60201 picture](/store/img/g/RNgAAOSwrTtlQZet/s-l225/HPE-ARUBA-2530-24G-J9773A-PoE-24-PORT-GIGABIT-ETHE.jpg)
HPE ARUBA 2530-24G J9773A PoE+ 24-PORT GIGABIT ETHERNET SWITCH J9773-60201
$93.24
![Cisco SG300-52 52 Port Gigabit Managed Network Switch w/ Rack Ears picture](/store/img/g/OJUAAOSwkKdmdKKv/s-l225/Cisco-SG300-52-52-Port-Gigabit-Managed-Network-Swi.jpg)
Cisco SG300-52 52 Port Gigabit Managed Network Switch w/ Rack Ears
$34.99
![NETGEAR GS108 ProSafe 8-Port GbE Unmanaged Switch w/ Power Adapter picture](/store/img/g/GtAAAOSw441l3Jx1/s-l225/NETGEAR-GS108-ProSafe-8-Port-GbE-Unmanaged-Switch-.jpg)
NETGEAR GS108 ProSafe 8-Port GbE Unmanaged Switch w/ Power Adapter
$14.99
![Netgear ProSafe FS726T 24 Port 10/100 Smart Switch w/2 Gigabit Ports picture](/store/img/g/iCwAAOSwVX9mcdMS/s-l225/Netgear-ProSafe-FS726T-24-Port-10-100-Smart-Switch.jpg)
Netgear ProSafe FS726T 24 Port 10/100 Smart Switch w/2 Gigabit Ports
$19.99
![TP-Link TL-SG108 8-Port 10/100/1000 Mbps Gigabit Ethernet Desktop Switch FREE SH picture](/store/img/g/eHwAAOSwSOxlsrl8/s-l225/TP-Link-TL-SG108-8-Port-10-100-1000-Mbps-Gigabit-E.jpg)
TP-Link TL-SG108 8-Port 10/100/1000 Mbps Gigabit Ethernet Desktop Switch FREE SH
$14.99
![Netgear Prosafe 48-Port GbE & 4-Port SFP Managed Network Switch GS752TS picture](/store/img/g/hLYAAOSwc9xmdEiW/s-l225/Netgear-Prosafe-48-Port-GbE-4-Port-SFP-Managed-Net.jpg)
Netgear Prosafe 48-Port GbE & 4-Port SFP Managed Network Switch GS752TS
$59.99
![HP 2530-48G PoE+ 48 Port PoE Gigabit Ethernet Network Switch J9772A picture](/store/img/g/4gwAAOSw1ztmXzV-/s-l225/HP-2530-48G-PoE-48-Port-PoE-Gigabit-Ethernet-Netwo.jpg)
HP 2530-48G PoE+ 48 Port PoE Gigabit Ethernet Network Switch J9772A
$99.98