I was trying to boot Knoppix 6.7.0 to a Lenovo T60. The hard drive was missing from the machine at the time. After entering in the boot options, (knoppix nodrm splash 2 apic=off) the machine rebooted when the screen blinked.
By "screen blinked" i mean after you enter in boot options, hit enter, and then it clears and normally starts showing the boot stuff. I see it clear, and then fade to deep black as the machine reboots. I never see a single line of text saying what it is doing.
If I put a hard drive in, it boots fine. I even tried "toram" on the boot options, but it doesn't get that far. Can anyone think of why it works with a HDD and not otherwise? this is off the CD. At first i thought it was bad memory. So I swapped that with some good stuff, and same result.
TIA.
Cisco UCS B200 M4 Blade Module 2x Xeon E5-2680 v3 12-Core NO RAM NO HDD
$39.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
Dell PowerEdge M640 Barebone Server Blade No Hard Drive Trays
$499.00
HP Proliant BL460C Gen8 Blade Server 2x 8C E5-2690 192GB Ram
$58.15
🔥 World Of Warcraft Server Blade 🔥
$944.86
Google Search Appliance - Dell PowerEdge R710 x2 Xeon X5690 192GB Memory 6TB HDD
$529.99
Dell PowerEdge M520 Blade Server Xeon E5-2403 NO HDD NO RAM
$45.00
DELL PowerEdge M630 Blade 2x E5-2660v4 2.0GHz =28 Cores 128GB H330 2x10Gb X520
$267.00
HP ProLiant BL460c Gen9 Blade 2x E5-2660v4 2.0GHz =28 Cores 128GB P246 650FLB
$267.00