-
Senior Member
registered user
Originally Posted by
utu
I've also noted that lxterminal -e (in either Run or Alt-F2)
works for mc, alsamixer and less /var/log/syslog
but does not work for vrms, ifconfig, dmesg
You need to emulate "keep the window open" behaviour by doing something like this :-
Code:
lxterminal -l -e "dmesg | less"
lxterminal -l -e "ifconfig ; read INP "
It's quite painful to need to issue such commands. Maybe the GUI should be the one which encapsulate all this, with an option to run program in a terminal window and "keep the window open". Should probably be suggested to the author of lxpanelctl, perhaps.
Cheers.
-
Senior Member
registered user
@ kl522
Thanks for your comments.
I suppose one could, with your help, tailor each command this way, but it's
still much easier to just to call up a 'real' lxterminal and enter the cli command.
My point here is the action of LXDE's Alt-F2/Run is just weird in the absolute,
let alone compared to several other well-established alternative standards.
@ To all concerned
I've spent a few minutes only with lxmed, but I already see a caveat to my
initial enthusiasm. lxmed does not seem to be an editor, but a composer.
The initial configuration which one edits is one based on one of four basic
linuxes: Debian, Red Hat, and (two others, but I forget which). This Debian
configuration does not exactly match Knoppix 6.7.1, notably missing out on
Knoppix's Universal Access submenu altogether.
lxmed may serve the purpose, but I'd make a copy of all relevant files before
applying any changes made by lxmed to a working Knoppix install.
We'd all probably do that anyway, I know.
Last edited by utu; 11-12-2011 at 01:10 AM.
-
Senior Member
registered user
Originally Posted by
utu
@ kl522
Thanks for your comments.
I suppose one could, with your help, tailor each command this way, but it's
still much easier to just to call up a 'real' lxterminal and enter the cli command.
My point here is the action of LXDE's Alt-F2/Run is just weird in the absolute,
let alone compared to several other well-established alternative standards.
This is not something I put emphasis on and I have no experience using other desktops in this 'run' dialog. So I can't compare the "other well-establish alternative standards".
But for the minimum, I noticed that you get the same thing in Windows XP. Try to enter 'ipconfig', 'route' etc into Windows Start->run. It will not work properly !
On the other hand, I think it's a trivial source code change to add two checkboxes, one checkbox for 'run program in terminal emulator' and another checkbox for 'keep terminal emulator window open'. It's a matter of whether the author feels like wanting to add this into the 'run' dialog.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch, no module
$399.97
32 Port 40GbE QSFP+ Cisco Nexus Enterprise Layer 3 VXLAN Switch Dual PSU
$149.00
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod
$89.00
Cisco Catalyst 1000 Series 24-Port Switch C1000-24T-4G-L
$325.00
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$38.99
Cisco Catalyst 3650 24 10/100/1000 Ethernet PoE+4x1G Uplink Port 640WAC LAN Base
$35.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
New Linksys SE3005 5-port Gigabit Ethernet Switch
$18.99
Cisco WS-C3850-12X48U-S Catalyst 3850 48 Port UPOE Switch - Same Day Shipping
$340.00
Cisco Nexus N3K-C3064PQ-10GX 48P 10GbE SFP+ 4P QSFP+ Switch N3K-C3064PQ-10GX
$269.00