While using knoppix 7.0.2, after going into "suspend" mode my system is back as it was before except for the network connectiion to the router. This is the error message I am getting when I try to get a new (or activate my old?) DHCP connection:
~Code:$ sudo netcardconfig eth0 Sending DHCP broadcast from device eth0Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:23:8b:98:6a:64 Sending on LPF/eth0/00:23:8b:98:6a:64 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 No DHCPOFFERS received. Unable to obtain a lease on first try. Exiting. Failed to bring up eth0.
How can I fix that?
~
thanks
lbrtchx
Last edited by Albretch; 08-01-2012 at 04:09 PM.
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch, no module
$279.97
Cisco Catalyst 3850 XS 10G SFP+ 24-Port Network Switch WS-C3850-24XS-E
$750.00
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch + NM-8X Module
$579.97
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig Copper UPOE Network Switch
$375.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$32.90
Genuine Cisco SFP-10G-SR Transceiver Module (10-2415-03)
$5.85
Cisco Catalyst C9200L-24P-4X-E PoE+ Switch
$850.00
Cisco Nexus 96-Port 10G SFP+ Switch N9K-93128TX w/ 9K-M12PQ 12-Port 40G QSFP
$149.99
Cisco Catalyst C9200-48P-E 48-Port Managed Gigabit Ethernet PoE+
$550.00