Results 1 to 2 of 2

Thread: safety drill using Maxtor One touch 4 Mini help needed badly

  1. #1
    Junior Member
    Join Date
    Jan 2012
    Posts
    1

    safety drill using Maxtor One touch 4 Mini help needed badly

    I am involved in a lawsuit and all the info is stored in a brand new hard drive less than 9 months old. I need to restore my hard drive need help as safety drill just stops and shows vertical lnes

  2. #2
    Senior Member registered user
    Join Date
    Jun 2005
    Posts
    348
    It is my understanding that the Safety Drill bootable disk is based on Knoppix. Exactly what version, I do not know. I can tell you it is an older version than what is current. The Maxtor One Touch 4 Mini drives have been discontinued and the software was getting old a few years ago. My suspicion is that your hardware may not work well with the provided version of Safety Drill. There may be a "cheat Code" you could use during the boot process. Just a guess based on your description of the screen, I would look towards codes affecting Display/Video parameters. Cheat codes can be found here: http://knoppix.net/wiki/Cheat_Codes My best recommendation would be to contact Seagate/Maxtor and see if they have any suggestions. They have a forum and also direct contact information on their website. I would be careful to preserve the data and not risk losing it by attempting to restore it with outdated software. The "Plus" drives carried a five year warranty if I'm not mistaken. If yours is still covered, they may provide support for you. If you were to read the instructions that came with your drive, I believe it clearly states that before you rely on the drive and software for backup, you should try the bootable disk on the target system. There were some limitations on what could be backed up as well. Some of it may be because the backup software does not appear to use volume shadow copying in applicable Windows platforms. Check the Seagate/Maxtor site and there should be some information available.

    If you are involved in a legal proceding, then Working with the drive manufacturer to resolve your issue would likely be the best solution.

    When you contact Seagate/Maxtor, I would highly recommend that you supply more detail of your hardware and what information is stored where and provide more about what caused you to need to restore the drive. Theft? Corruption? Drive Failure?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 4GB RAM No HDD's

HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 4GB RAM No HDD's "read"

$149.99



HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ* picture

HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*

$94.99



HP ProLiant Xeon E3-1220L V2 16 GB RAM 2.30 GHz MicroServer Gen8 NO DRIVES picture

HP ProLiant Xeon E3-1220L V2 16 GB RAM 2.30 GHz MicroServer Gen8 NO DRIVES

$174.99



HP ProLiant Xeon E3-1220L V2 2.30 GHz 16 GB RAM MicroServer Gen8 NO DRIVES picture

HP ProLiant Xeon E3-1220L V2 2.30 GHz 16 GB RAM MicroServer Gen8 NO DRIVES

$199.99



HPE microserver Gen8 Update Firmware iLO4 + BIOS System Latest HP Server FAST⚡️✅ picture

HPE microserver Gen8 Update Firmware iLO4 + BIOS System Latest HP Server FAST⚡️✅

$79.99



Supermicro  CSE  823-6 2U 6 Bay Chassis ,1xPWS 653-2H 650Wsold as in the photo, picture

Supermicro CSE 823-6 2U 6 Bay Chassis ,1xPWS 653-2H 650Wsold as in the photo,

$119.75



HPE ProLiant MicroServer Gen 10 AMD Opteron X3421,  8GB picture

HPE ProLiant MicroServer Gen 10 AMD Opteron X3421, 8GB

$217.86



HP ProLiant Microserver Micro Server HSTNS-5151 untested NO DRIVE CADDIES picture

HP ProLiant Microserver Micro Server HSTNS-5151 untested NO DRIVE CADDIES

$67.50



2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL picture

2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL

$299.00



1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE picture

1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE

$297.00