Referring you to thread #29734, post #14.
luther
I am trying to use Knoppix on a laptop with a BCM4318 wireless card. Output from lspci -nn | grep BCM:
05:02.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
According to http://linuxwireless.org/en/users/Drivers/b43, this card is supported by b43. And
http://www.knoppix.net/forum/threads...dapter-problem says that I can install the firmware and comment out the blacklist for b43.
This however, does not work. I think it is because there is no b43 module included. If I manually do "sudo modprobe b43", I get
FATAL: Module b43 not found.
In /lib/modules/3.0.4/kernel/drivers/net/wireless, there is b43legacy but not b43.
How do I add the b43 module?
Referring you to thread #29734, post #14.
luther
DELL PowerEdge R630 8SFF Server 2x E5-2680v4 2.4GHz =28 Cores 128GB H730 4xRJ45
$346.00
DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$296.00
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$256.99
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$489.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
HP ProLiant DL360 G9 Server 2x E5-2690v3 2.60Ghz 24-Core 256GB P440ar
$302.90
Dell PowerEdge T620 8-Bay LFF Xeon E5-2660 0 2.20GHz 48GB NO HDD S110 Server
$174.99
HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 8GB RAM No HDD's
$229.99
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB
$324.99
Dell Poweredge R730xd 3.5 2x E5-2690 v3 2.6ghz 64gb H730 14x Trays 2x 1100w
$489.99