Referring you to thread #29734, post #14.
luther
I am trying to use Knoppix on a laptop with a BCM4318 wireless card. Output from lspci -nn | grep BCM:
05:02.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
According to http://linuxwireless.org/en/users/Drivers/b43, this card is supported by b43. And
http://www.knoppix.net/forum/threads...dapter-problem says that I can install the firmware and comment out the blacklist for b43.
This however, does not work. I think it is because there is no b43 module included. If I manually do "sudo modprobe b43", I get
FATAL: Module b43 not found.
In /lib/modules/3.0.4/kernel/drivers/net/wireless, there is b43legacy but not b43.
How do I add the b43 module?
Referring you to thread #29734, post #14.
luther
Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W
$329.99
Dell PowerEdge T420 2x Xeon E5-2430 V2 2.50GHZ 32GB DDR3-1600MHZ 2x 550W PSU
$149.95
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$477.99
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$169.95
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
HP ProLiant DL360 G9 Server 2x E5-2620v3 2.40Ghz 12-Core 32GB P440ar
$220.05
DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 256GB H730 4xRJ45
$562.00