Results 1 to 2 of 2

Thread: safety drill using Maxtor One touch 4 Mini help needed badly

  1. #1
    Junior Member
    Join Date
    Jan 2012
    Posts
    1

    safety drill using Maxtor One touch 4 Mini help needed badly

    I am involved in a lawsuit and all the info is stored in a brand new hard drive less than 9 months old. I need to restore my hard drive need help as safety drill just stops and shows vertical lnes

  2. #2
    Senior Member registered user
    Join Date
    Jun 2005
    Posts
    348
    It is my understanding that the Safety Drill bootable disk is based on Knoppix. Exactly what version, I do not know. I can tell you it is an older version than what is current. The Maxtor One Touch 4 Mini drives have been discontinued and the software was getting old a few years ago. My suspicion is that your hardware may not work well with the provided version of Safety Drill. There may be a "cheat Code" you could use during the boot process. Just a guess based on your description of the screen, I would look towards codes affecting Display/Video parameters. Cheat codes can be found here: http://knoppix.net/wiki/Cheat_Codes My best recommendation would be to contact Seagate/Maxtor and see if they have any suggestions. They have a forum and also direct contact information on their website. I would be careful to preserve the data and not risk losing it by attempting to restore it with outdated software. The "Plus" drives carried a five year warranty if I'm not mistaken. If yours is still covered, they may provide support for you. If you were to read the instructions that came with your drive, I believe it clearly states that before you rely on the drive and software for backup, you should try the bootable disk on the target system. There were some limitations on what could be backed up as well. Some of it may be because the backup software does not appear to use volume shadow copying in applicable Windows platforms. Check the Seagate/Maxtor site and there should be some information available.

    If you are involved in a legal proceding, then Working with the drive manufacturer to resolve your issue would likely be the best solution.

    When you contact Seagate/Maxtor, I would highly recommend that you supply more detail of your hardware and what information is stored where and provide more about what caused you to need to restore the drive. Theft? Corruption? Drive Failure?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


AUDIO CODES  MP-114 VOIP Gateway Open Box picture

AUDIO CODES MP-114 VOIP Gateway Open Box

$37.49



Cisco CP-8832-K9 Unified 8800 Series Conference VOIP IP Phone 1 Year Warranty picture

Cisco CP-8832-K9 Unified 8800 Series Conference VOIP IP Phone 1 Year Warranty

$139.00



IXIA XR100 VOIP PROBE picture

IXIA XR100 VOIP PROBE

$199.99



Cisco CP-8821-K9 8821 Wireless VOIP IP Phone 1 Year Waranty picture

Cisco CP-8821-K9 8821 Wireless VOIP IP Phone 1 Year Waranty

$330.00



Yealink W73H IP DECT VOIP Phone picture

Yealink W73H IP DECT VOIP Phone

$10.00



Cisco CP-7945G VOIP Phone With Stand & Handset Business IP Phone 7945 picture

Cisco CP-7945G VOIP Phone With Stand & Handset Business IP Phone 7945

$3.00



New Cisco 7945G IP VoIP Gigabit GIGE Telephone Phone CP-7945G -  picture

New Cisco 7945G IP VoIP Gigabit GIGE Telephone Phone CP-7945G -

$24.95



Grandstream GS-HT802 2 Port Analog Telephone Adapter VoIP Phone & Device, Black picture

Grandstream GS-HT802 2 Port Analog Telephone Adapter VoIP Phone & Device, Black

$32.00



Cisco VG202XM Analog Voice Gateway VoIP -- [NEW/FULL KIT] picture

Cisco VG202XM Analog Voice Gateway VoIP -- [NEW/FULL KIT]

$76.00



LOT OF 10 Cisco CP-7841-K9 VoIP 4-Line Business Phone w/ Stand Handset Cord picture

LOT OF 10 Cisco CP-7841-K9 VoIP 4-Line Business Phone w/ Stand Handset Cord

$69.99