Referring you to thread #29734, post #14.
luther
I am trying to use Knoppix on a laptop with a BCM4318 wireless card. Output from lspci -nn | grep BCM:
05:02.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
According to http://linuxwireless.org/en/users/Drivers/b43, this card is supported by b43. And
http://www.knoppix.net/forum/threads...dapter-problem says that I can install the firmware and comment out the blacklist for b43.
This however, does not work. I think it is because there is no b43 module included. If I manually do "sudo modprobe b43", I get
FATAL: Module b43 not found.
In /lib/modules/3.0.4/kernel/drivers/net/wireless, there is b43legacy but not b43.
How do I add the b43 module?
Referring you to thread #29734, post #14.
luther
Dell R730 w/ 2x E5-2650v3 10c, 192GB (12x16GB) RAM, H730 Mini, 2x 750W PSU
$499.99
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$275.00
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R730, 2 sinks, SystemBoard, 8 trays,H330,Idrac 8 exp, 2x750w Psu
$135.00
Dell PowerEdge R620 Server 2x Xeon E5-2620 @ 2.0GHz 64GB RAM NO HDDs
$108.96
Dell PowerEdge R630 2x Xeon E5-2630 V4 2.20GHZ 128GB DDR4-2133MHZ 2x 750W PSU
$170.95
Dell PowerEdge R620 Server - 256GB RAM, 2x8c CPU, 128Gb SSD/3x600Gb SAS, Proxmox
$320.00
DELL PowerEdge R730 Server 2x E5-2643v3 3.4GHz =12 Cores 64GB H730 4xRJ45
$306.00
Dell PowerEdge R620 Rack Server
$71.99