Referring you to thread #29734, post #14.
luther
I am trying to use Knoppix on a laptop with a BCM4318 wireless card. Output from lspci -nn | grep BCM:
05:02.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
According to http://linuxwireless.org/en/users/Drivers/b43, this card is supported by b43. And
http://www.knoppix.net/forum/threads...dapter-problem says that I can install the firmware and comment out the blacklist for b43.
This however, does not work. I think it is because there is no b43 module included. If I manually do "sudo modprobe b43", I get
FATAL: Module b43 not found.
In /lib/modules/3.0.4/kernel/drivers/net/wireless, there is b43legacy but not b43.
How do I add the b43 module?
Referring you to thread #29734, post #14.
luther
Supermicro 4U 36 Bay Storage Server 2.2Ghz 16-C 128GB 1x1280W Rails TrueNAS ZFS
$725.06
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W
$2612.18
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
1U Server (6-8 VM's) Vsphere VPS Short Depth 20" XEON 3.5Ghz 32GB RAM X10SLM-F
$199.00
Supermicro 2U X11DPU 2x Xeon Gold 6132 2.6GHz / 128gb / 12x Trays / S3108L-H8ir
$749.99