Results 1 to 3 of 3

Thread: Knoppix and Debian

  1. #1
    Junior Member
    Join Date
    Mar 2012
    Posts
    1

    Knoppix and Debian

    Hey guys,
    First off, im a Linux novice.
    I'm doing a school project on Knoppix and i was hoping to get some information about how Knoppix differs from Debian. From my research so far, i understand that Knoppix includes more bleeding edge software so in certain cases it may not be as stable as Debian (which is one of its biggest selling points) but the trade off is that it gets more functionality. Knoppix currently only has 32 bit support.
    Knoppix is primarily a Live CD distro but with a bit of work you can install it on your HDD. Because its a Live CD, it works great when used for recovery of a system thats gone down.

    Please correct me if im wrong anywhere and i'd greatly appreciate it if you could point me to a few resources to read up more.

    Thanks!

  2. #2
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Greetings, routaran.

    Here is a somewhat dated reference you might consult:
    http://en.wikibooks.org/wiki/A_Neutr.../Linux#Knoppix

    You will only have a good answer to your question after you have tried and
    succeeded getting both to work on your own hardware. To than end you might try
    setting up a LiveCD or a LiveUSB of each. There is a PenDrive site that makes
    this pretty easy using a Windows setup to begin-with:
    http://www.pendrivelinux.com/univers...easy-as-1-2-3/

  3. #3
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631

    A few generalities may apply here:

    .
    It is generally the case that Knoppix is used as a LiveCD LiveUSB,
    or in a poor-man's HDD install,
    where Debian is more often used in a 'permanent' HDD install.

    Knoppix is probably the best distribution of ANY, in regard to
    hardware recognition; more likely to JUST WORK with any
    keyboard/video/graphics/wifi combination than any other distribution.
    It follows that, given the same hardware to work with,
    Knoppix makes it easier for a novice to get a working linux.

    Debian MAY be more suitable for advanced users to tailor
    to their specific needs.

    Knoppix is not limited to 32-bits-only; however, most linux users would be
    hard put to demonstrate a common and significant use or situation
    where 64-bits offers anything more than a MODEST capability improvement;
    notable exceptions being re-mastering and/or working with file SIZES
    greater than 4 Gb.
    Last edited by utu; 03-03-2012 at 05:10 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


MITS ALTAIR 8800  Original Vintage Microcomputer picture

MITS ALTAIR 8800 Original Vintage Microcomputer

$6000.00



MITS Altair 8800 Computer Bamboo  Reproduction Arduino Tested Working Assembled  picture

MITS Altair 8800 Computer Bamboo Reproduction Arduino Tested Working Assembled

$649.99



MITS ALTAIR 8800  Original Vintage Microcomputer  S-100   Buy It Now $5999 picture

MITS ALTAIR 8800 Original Vintage Microcomputer S-100 Buy It Now $5999

$5999.00



MITS ALTAIR 8800 88-2SIO Reproduction Board picture

MITS ALTAIR 8800 88-2SIO Reproduction Board

$35.00



MITS ALTAIR 8800  Original Vintage Microcomputer with 14 boards - Buy It Now picture

MITS ALTAIR 8800 Original Vintage Microcomputer with 14 boards - Buy It Now

$9500.00



S-100 backplane motherboard bare PCB 9 slot (for Altair/IMSAI) picture

S-100 backplane motherboard bare PCB 9 slot (for Altair/IMSAI)

$30.00



Vintage 8085 Altair Board  picture

Vintage 8085 Altair Board

$85.95



Altair Model 202 picture

Altair Model 202

$22.50



Vintage Altair 8088 CPU Wire Wrapped S100 Card w Mon EPROM circuit board #T71 picture

Vintage Altair 8088 CPU Wire Wrapped S100 Card w Mon EPROM circuit board #T71

$99.00



HyperWorks 2020 Suite for PC (Tool For Engineering Design, Simulation) 50Gb picture

HyperWorks 2020 Suite for PC (Tool For Engineering Design, Simulation) 50Gb

$72.87