Hi Johnmd,
I use every day Canon MP190 with knoppix 6.7.1
I use the default driver of knoppix: choose Canon PIXMA MP180 with CUPS and Gutenprint
It works great
I have yet to try with knoppix 7 when will be available
Bye
Hi Everyone
The printer driver packages I downloaded from Canon for my Canon Pixma mp190 multifunction which have worked fine since Knoppix 6.0.1 -see post below
http://knoppix.net/forum/threads/276...nown-yesterday
no longer work in Knoppix 7.0 because it now uses the package libcups2 instead of libcupsys2. After some googling I found this post that seemed to offer a DIY solution
http://www.teachmejoomla.net/code/li...udev-rule.html
This post gives the general idea of what to do.
But in fact it doesn't work on debian/knoppix 7.0 because there is no <deb> command available and archive-manager/file-roller will only open an archive read only [even when run as root] - but what does work is to extract cnijfilter-common####.deb with the command
file-roller --extract-to=./cnijfilter-common cnijfilter-common_3.00-1_i386.deb
[answering yes to the question of whether to create the folder as it does not yet exist]
then go into created folder <cnijfilter-common> and open the file /Debian/control with gedit [as root] and change the entry under line 'requires' from
libcupsys2 to libcups2 - [inserting in the approprate version details for your libcups2 package]
save the changes and then put the .deb package back together again with
dpkg-deb --build cnijfilter-mp190 cnijfilter-mp190.deb
giving it a new name - [which doesn't have to obey all the complex debian package/version nameing rules if you are only doing it for your own immediate use]
then install your new package
dpkg -i cnijfilter-common.deb
and repeat the whole process with the cnijfilter-mp190#####.deb package and install that too
then go to preferences | printer configuration and modify the settings again to change the driver to the one you've just installed
The scangear-common####.deb and scangear-mp190####.deb packages will install fine just as they are, without playing around with them [on my ageing Compaq desktop, anyway].
I doubt if such a simple fix will work in many cases of dependency conflict but it does work in this case. I hope it will help other people too.
Best wishes, John
Hi Johnmd,
I use every day Canon MP190 with knoppix 6.7.1
I use the default driver of knoppix: choose Canon PIXMA MP180 with CUPS and Gutenprint
It works great
I have yet to try with knoppix 7 when will be available
Bye
Hi Blacksimon
Thank you. I'll remember that in future. I'm sure you are right. I've just got in a bit of a rut with installing the Canon Driver version. It's so long ago now that i started doing this, (maybe back to v6.0) that I'm not sure exactly, but I have a memory of colour printing not giving the true colours with the standard Gutenprint MP180 driver. But by now, maybe the Gutenprint Driver has changed too. It's certainly much easier to just use the Gutenprint one that comes already to use with Knoppix.
Best wishes, John
Dell PowerEdge M610 Blade Server E5620@2.2GHZ (6x)8GB RAM (2x)146GB 15K SAS HDD
$75.00
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2294.99
CISCO 5108 Blade Server Chassis N20-C6508
$200.00
DELL POWEREDGE M620 SERVER BLADE INTEL XEON E5-2670 @ 2.60GHZ 128GB RAM 2X 146GB
$359.10
HP ProLiant BL460c G8(Gen8) 2x 8 CORE E5-2670 2.6GHz 192GB RAM 2x 146GB SAS HDD
$78.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
DELL POWEREDGE M620 Blade 2x Xeon E5-2670 2.5GHz 128GB 2x300GB HDD
$94.50
Dell PowerEdge M1000e (BMX01) Server Enclosure w/ 16-PowerEdge M610 Blade Server
$899.99
Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb
$599.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$349.00