-
Knoppix 7.0 requires modification of Canon Printer Driver .deb packages
Hi Everyone
The printer driver packages I downloaded from Canon for my Canon Pixma mp190 multifunction which have worked fine since Knoppix 6.0.1 -see post below
http://knoppix.net/forum/threads/276...nown-yesterday
no longer work in Knoppix 7.0 because it now uses the package libcups2 instead of libcupsys2. After some googling I found this post that seemed to offer a DIY solution
http://www.teachmejoomla.net/code/li...udev-rule.html
This post gives the general idea of what to do.
But in fact it doesn't work on debian/knoppix 7.0 because there is no <deb> command available and archive-manager/file-roller will only open an archive read only [even when run as root] - but what does work is to extract cnijfilter-common####.deb with the command
file-roller --extract-to=./cnijfilter-common cnijfilter-common_3.00-1_i386.deb
[answering yes to the question of whether to create the folder as it does not yet exist]
then go into created folder <cnijfilter-common> and open the file /Debian/control with gedit [as root] and change the entry under line 'requires' from
libcupsys2 to libcups2 - [inserting in the approprate version details for your libcups2 package]
save the changes and then put the .deb package back together again with
dpkg-deb --build cnijfilter-mp190 cnijfilter-mp190.deb
giving it a new name - [which doesn't have to obey all the complex debian package/version nameing rules if you are only doing it for your own immediate use]
then install your new package
dpkg -i cnijfilter-common.deb
and repeat the whole process with the cnijfilter-mp190#####.deb package and install that too
then go to preferences | printer configuration and modify the settings again to change the driver to the one you've just installed
The scangear-common####.deb and scangear-mp190####.deb packages will install fine just as they are, without playing around with them [on my ageing Compaq desktop, anyway].
I doubt if such a simple fix will work in many cases of dependency conflict but it does work in this case. I hope it will help other people too.
Best wishes, John
-
Member
Hi Johnmd,
I use every day Canon MP190 with knoppix 6.7.1
I use the default driver of knoppix: choose Canon PIXMA MP180 with CUPS and Gutenprint
It works great
I have yet to try with knoppix 7 when will be available
Bye
-
Hi Blacksimon
Thank you. I'll remember that in future. I'm sure you are right. I've just got in a bit of a rut with installing the Canon Driver version. It's so long ago now that i started doing this, (maybe back to v6.0) that I'm not sure exactly, but I have a memory of colour printing not giving the true colours with the standard Gutenprint MP180 driver. But by now, maybe the Gutenprint Driver has changed too. It's certainly much easier to just use the Gutenprint one that comes already to use with Knoppix.
Best wishes, John
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
Dell R630 8SFF 2.4Ghz 20-Core 128GB H730 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$455.04
Dell R740XD2 26LFF 3.6Ghz 8-C 768GB H730P MINI RAID 2x10G SFP+ NIC 2x1100W Rails
$3538.08
Dell R740XD2 26LFF 3.6Ghz 8-C 256GB H730P MINI RAID 2x10G SFP+ NIC 2x1100W Rails
$2802.08
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
Dell PowerEdge RAID Controller HBA330 12Gbs PCIe 3.0 SAS SATA J7TNV Low Profile
$29.00
LSI MegaRaid 9361-8i 12Gbps SAS / SATA Raid Controller PCIe x8 3.0 Tested
$29.00
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$143.99