I just tried to boot Knoppix on a pair of new Dell Optiplex 390 systems. I get:
Could not mount disk to /mnt-system. Starting debugging Shell...
?: can't access tty; job control turned off
(The ? falls of the edge of my cheap old LCD).
I got this error with Knoppix 6.4.4, so I burned a new 6.7.1 disc and got the same error. I have tried the following cheat codes:
knoppix vga=0
knoppix acpi=off pnpbios=off noapic noapm
knoppix vga=0 debug -b 3
failsafe debug -b 3
The system has a Pentium G630, on-processor video (HD Graphics 200), Intel H61 Express chipset, 4GB RAM, SATA hard drive and DVD drive.
Thanks!
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$721.06
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W
$2612.18
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45
$353.00
Dell Poweredge R730xd 2.5in 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$189.99