-
WiFi Work-Around for those w/B43 Requirement
Originally Posted by
utu
@ luther
I expect Klaus2008 may be able to show you how, but
building and installing b43 from scratch is probably a more difficult exercise than you want to undertake.
If or when Klaus K tackles this problem, I would expect to see the result around mid-year in an update on Knoppix 7.0.
I would not necessarily expect to see an amended 6.7.1.
An external wifi, compatible with your computer would be a possible interim solution.
I use that approach to get some of the other distributions going.
Knoppx Forum Members,
I agree with utu, that an interim solution be possible. This is NOT something I have
tried, but would this be a valid candidate:
http://www.amazon.com/SANOXY-Wireles...3593945&sr=8-4
Reply requested, please . . .
-
Senior Member
registered user
Originally Posted by
luther
I need more details of your external wifi setup
I use a Netgear wg111v2 to work with Ubuntu & clones. See, for example:
http://support.netgear.com/app/products/model/a_id/2557
I bought mine from Surplus a few years back for $10 or $15.
This gets around my Broadcom nightmare with Ubuntu clones.
It might help for Knoppix. I can't say, since I never needed it for that.
-
Senior Member
registered user
@ luther, in re your Post #21 about an 'N' dongle:
This is a neat-looking little gadget at the right price, but it may not serve for two reasons:
1. Many routers work with a & g but not N; N is fairly new.
edit: I see it is n/g/b, so that's probably not a problem; g is ok.
2. There's always a chance it needs a driver no linuxer has come up with.
Does this sound familiar?
Your best interim solution so far is Knoppix 6.4.3, and that's not bad.
Last edited by utu; 04-20-2012 at 04:06 PM.
-
Senior Member
registered user
Addendum to my post #23, in re Sanoxy 'N' dongle.
One of the Amazon comments states that the unit works fine on linux
by installing a driver via ndiswrapper.
I think this may mean this device is a b43 candidate for fwcutter these days.
If so, that's the problem we're already wrestling with, not a solution.
-
Senior Member
registered user
Status summary on Broadcom wl vs b43 snag
.
Here's an interesting comparison, looking at Knopppix 6.4.4 relative to
luther's Posts #16 and #20 for Knoppix 6.4.3:
Code:
knoppix@Microknoppix:~$ ls /lib/modules/*/kernel/drivers/net/wireless
adm8211.ko atmel_cs.ko iwmc3200wifi p54 wl.ko
airo.ko atmel_pci.ko libertas prism54 wl1251
airo_cs.ko b43legacy libertas_tf ray_cs.ko wl12xx
at76c50x-usb.ko hostap mac80211_hwsim.ko rndis_wlan.ko wl3501_cs.ko
ath ipw2x00 mwl8k.ko rt2x00 zd1201.ko
atmel.ko iwlwifi orinoco rtl818x zd1211rw
I think this means 6.4.4 has a kernel with wl built-in, lacking b43;
whereas 6.4.3 has a kernel with b43 built-in, lacking wl.
Hint:
wl.ko shows up in 6.4.4 which I use, and b43.ko shows up in luther's 6.4.3
So, I think this means we have to consider not only offering (at least)
two drivers, but two kernels-to-match as well, for Broadcom users.
Interestingly so, this actually occurred with Knoppix 6.4.3 and 6.4.4
taken together as one distribution. One size does not fit all here.
-
Beta test complete
Summary:
Further Broadcom support requested to Developer.
-
Senior Member
registered user
We will be lucky if Klaus K doesn't ban Broadcom wifis altogther from future consideration,
as being a lot more trouble than its worth.
I know of no current linux distro that supports both b43 and wl; it's either one or the other.
The tangled list of which PCI-ID goes with which driver would make a nice hardware museum.
-
Keep Linux open
Originally Posted by
utu
We will be lucky if Klaus K doesn't ban Broadcom wifis altogther from future consideration,
as being a lot more trouble than its worth.
I know of no current linux distro that supports both b43 and wl; it's either one or the other.
The tangled list of which PCI-ID goes with which driver would make a nice hardware museum.
Dear utu:
What excites me about the IBM PC/Clones is the ability to OPEN the hood! Software has always lagged behind and needs to catch-up! Software "101" in the distro world should be wireless networking. I've got NO use for the burnt ISO's that fail this basic hurdle.
I found another keeper here:
http://lubuntu.net/blog/lubuntu-1104-released
Thanks for your prompt replies.
luther
-
Senior Member
registered user
Originally Posted by
utu
.
Here's an interesting comparison, looking at Knopppix 6.4.4 relative to
luther's Posts #16 and #20 for Knoppix 6.4.3:
Code:
knoppix@Microknoppix:~$ ls /lib/modules/*/kernel/drivers/net/wireless
adm8211.ko atmel_cs.ko iwmc3200wifi p54 wl.ko
airo.ko atmel_pci.ko libertas prism54 wl1251
airo_cs.ko b43legacy libertas_tf ray_cs.ko wl12xx
at76c50x-usb.ko hostap mac80211_hwsim.ko rndis_wlan.ko wl3501_cs.ko
ath ipw2x00 mwl8k.ko rt2x00 zd1201.ko
atmel.ko iwlwifi orinoco rtl818x zd1211rw
I think this means 6.4.4 has a kernel with wl built-in, lacking b43;
whereas 6.4.3 has a kernel with b43 built-in, lacking wl.
Hint:
wl.ko shows up in 6.4.4 which I use, and b43.ko shows up in luther's 6.4.3
So, I think this means we have to consider not only offering (at least)
two drivers, but two kernels-to-match as well, for Broadcom users.
Interestingly so, this actually occurred with Knoppix 6.4.3 and 6.4.4
taken together as one distribution. One size does not fit all here.
In trying this on Klaus K, I think there's a better, more plausible explanation:
The kernel in 6.7.1 may not have been built to accept b43 modules,
whereas, it appears 6.4.3/6.4.4 if they contain the same kernel DO accept both wl & b43 modules.
If that's the case, 6.7.1 surely favors only wl at the expense of ALL potential b43 users.
This turns out to be easily remedied by making sure future kernels don't preclude using
all likely useful modules. It does NOT imply a proliferation of kernels.
-
Senior Member
registered user
Originally Posted by
utu
The kernel in 6.7.1 may not have been built to accept b43 modules
Klaus2008's post #7 is crucial here.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
New Precision DWDM SFP+ 10G 80km Tunable Transceiver 50GHz C-Temp DWDM-SFP10G-C
$90.00
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$95.00
LOT OF 10 HPE JD092B X130 10G SFP+ LC SR Transceiver
$40.00
Fully Compatibility 10GBase-T Transceiver SFP-10G-T SFP+ to RJ45 Copper 30M 80M
$58.50
🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥
$6.80
GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03
$6.80
Genuine Cisco ‎SFP-10G-SR Transceiver Module (10-2415-03)
$5.85
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$12.99
New Cisco SFP-10G-LRM 10G SFP+ LRM 1310nm 220m SMF/MMF LC Module
$32.19
New Cisco GLC-TE 1G SFP Copper RJ45 100m 1000BASE-T Transceiver Module
$21.62