-
Junior Member
registered user
Pxe boot with Broadcom BCM5754 does not work
I am using Knoppix 6.7.0 in a PXE boot environment. I have remastered it a little bit to remove some packages and whatnot, but it's pretty vanilla. It's been working fine for a few months now, on lots of different hardwares.
I am having a problem with PXE booting a Dell 740 which has a Broadcom BCM5754 Gigabit card. I believe the problem is the firmware for the card, although I don't know. I can boot the machine using the Knoppix 6.7.0 CD, and it loads the NIC driver fine.
The exact behavior is this: I do the PXE boot, and it loads the minirt.gz image. I see kernel loading lines flash through the screen very very quickly, and then the machine reboots. It appears to be rebooting at the point it's trying to execute udhcp. I can't say with certainty because it is rebooting so fast. Sometimes so fast I barely see the kernel lines show up.
I booted to cd (also Knoppix 6.7.0) to diagnose what modules are loaded etc, and found that the tg3.ko module has 3 firmware files it loads. Those files are not in the minirt.gz packing. (but they are on the cd). So i copied the /lib/firmware folder to the minirt.gz, but it is not working. I then found a post on writing a custom hotplug script in /sbin/hotplug to load the firmware, but that does not seem to be executing, or if it is, it is not working. The article I found targeted Knoppix 5, so maybe it's not applicable anymore. (i tried to put an echo and a sleep to test, but for all i know it's in a background thread)
While I was at it, I modified the init script to not call the restart command in the bailout() function.
this does not stop the machine from rebooting!
I am at a loss as to how to diagnose this. It works from CD but not PXE, which shouts NIC, but I just don't know. I've tried removing the driver altogether to see if the script will pause and complain about no network / driver etc. No joy.
Any one have any ideas on how to approach this?
-
Junior Member
registered user
I booted to the CD and did a lsmod to get a list of everything. Then I used modinfo to go through the list for dependencies.
I then copied all of the .ko files to a drivers folder and renamed them to go in order. (ie, 0_ttm.ko, so that the nouveau.ko file can load).
I repacke the initram and rebooted, and this time the screen locks up with what looks like a kernel panic screen. This makes me feel like I'm moving in the right direction, but ... well, I put all of the kernel modules that I saw in /proc/modules. So I'm stumped again.
-
Junior Member
registered user
So i figured it out. and it makes no sense to me..
Somehow a while ago (like 5 months) I must have made a typeo when creating my customzed initrd. (this was when I was fixing the broadcomm b44.ko driver to work)
The root of the minirt.gz had a file called ..miniroot
I found it by accident. Once I removed that file and re-created the pxe minirt.gz it worked fine.
I don't understand how just this one model of machine broke, or even why it broke. but it's fixed now.
chalk this up to PEBKAC
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$721.06
Dell PowerEdge R630 8SFF 2.6Ghz 20-Core 128GB Mem 4x1G RJ-45 NIC 2x750W PSU
$399.04
~DAILY DEALZ ~ Apple Mac Pro: Intel Xeon 32GB RAM 1TB SSD 1 Year Warranty
$284.99
CSE-118 Supermicro 1U 3x GPU Server 2.1Ghz 16-C 128GB CX353A 2x1600W PSU Rails
$450.03
Intel Xeon Gold 6138 2.0GHz 27.5MB 20-Core 125W LGA3647 SR3B5
$46.00
Intel Xeon E5-2690V2 3.00GHz 10-Core (SR1A5) Processor CPU READ DESCRIPTION
$12.00
Intel Xeon E5-2697 V4 2.30 GHz 18C 2011-3 2400MHz 45MB 145W SR2JV CPU Processor
$49.99
CM8066002031501 INTEL XEON E5-2680V4 2.40GHZ 35MB 14-CORE 120W PROCESSOR
$19.95
HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram 512 SSD Quadro K420 Linux GA
$243.59
HP Z800 Workstation 2x Xeon X5675 3.06Ghz 12-Cores 96gb 256gb SSD 2Tb Win10
$269.99