So I am considering the purchase of a banged up macbook as a fixer-upper. It has a broken monitor and there currently is not an operating system installed. I need to test it to make sure that it can boot up before handing over any money for it. My plan was to use the Knoppix live boot cd and a mini-dvi to rca adapter that connects to a small portable television. I have a macbook of my own so I am using that to test if my approach will work. Upon boot up Knoppix starts up just fine and the dvi adapter is auto-detected so it is getting a signal. But my little television displays three rows, each containing scrambled copies of the proper screen, without color, that slide almost like a vhs tape that is tracking incorrectly. Occasionally a "No Signal" message appears and then a second later it flashes back to the sliding rows. I am assuming that there is some setting I must change in the "Monitior Settings" to get the proper appearance. But I have no idea what that setting might be. Any thoughts / suggestions would be appreciated. Thanks.
Matt
LSI SAS9207-8e 8-Port PCIe IT Mode 9207-8e SAS 6Gb/s External HBA RAID Card
$33.00
ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT
$36.44
ORICO 4/5 Bay External Hard Drive Enclosure USB3.0/Type C for 2.5/3.5'' HDD SSD
$103.99
NEW LSI MegaRAID 9361-4I Raid Controller Card 4 ports + Cache Vault + Battery
$55.00
Adaptec - ASR-7805 6Gbs SAS- PCI EXPRESS 3.0 X8 -1GB Cache RAID Controller Card
$24.99
9207-8i PCIE3.0 6Gbps HBA LSI FW:P20 IT Mode ZFS FreeNAS unRAID 2* SFF-8087 US
$32.88
Dell PowerEdge PERC H740P RAID Controller, 8GB NV Cache PCI Full Height Adapter
$125.00
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA HDD Controller 9300-8i
$14.99
MiniPro RAID V4 USB-C 10Gbps Dual Bay Enclosure USA ONLY
$178.51
BROADCOM Mega RAID 9560-8i RAID Controller
$500.00