So I am considering the purchase of a banged up macbook as a fixer-upper. It has a broken monitor and there currently is not an operating system installed. I need to test it to make sure that it can boot up before handing over any money for it. My plan was to use the Knoppix live boot cd and a mini-dvi to rca adapter that connects to a small portable television. I have a macbook of my own so I am using that to test if my approach will work. Upon boot up Knoppix starts up just fine and the dvi adapter is auto-detected so it is getting a signal. But my little television displays three rows, each containing scrambled copies of the proper screen, without color, that slide almost like a vhs tape that is tracking incorrectly. Occasionally a "No Signal" message appears and then a second later it flashes back to the sliding rows. I am assuming that there is some setting I must change in the "Monitior Settings" to get the proper appearance. But I have no idea what that setting might be. Any thoughts / suggestions would be appreciated. Thanks.
Matt
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Supermicro 4U 36 Bay Storage Server 2.2Ghz 16-C 128GB 1x1280W Rails TrueNAS ZFS
$725.06
Dell PowerEdge R630 8SFF 2.6Ghz 20-Core 128GB Mem 2x10G+2x1G NIC 2x750W PSU
$399.04
CSE-118 Supermicro 1U GPU Server 2.6Ghz 28-C 128GB 2x Nvidia K40 GPU 2x1600W PSU
$580.03
Intel Xeon E5-2680 v4 2.4GHz 35MB 14-Core 120W LGA2011-3 SR2N7
$17.99
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$44.99
INTEL XEON GOLD 6148 2.40 GHz SR3B6 CPU
$98.99
Intel Xeon E5-2697 v2 2.7GHz 30M 12-Core LGA2011 CPU Processor SR19H
$27.99
Dell Precision T3600 Intel Xeon 2.8 E5-1603 240GB SSD 24GB RAM No OS Project PC
$99.99
HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45
$353.00