-
Automatically Start nm-applet After HD Install...
I just installed Knoppix 6.7.1 to HDD from a Live CD. While using the Live CD, The Network Manager's nm-applet places an icon in the panel, but after installing, the nm-applet icon is NOT in the panel. It appears that nm-applet isn't loaded in the case of a full install. I can load nm-applet by going to a terminal session and entering "nm-applet &", which will then place the applet's icon in the panel, with all working normally afterward. But, I want it to work the same as the Live CD.
Question: How do I get nm-applet to load automatically?
__________________________________________________ _
IBM Aptiva, AMD K6 266MHz, 256Mb Memory, 15Gb HD, D-Link G122 USB Wireless
-
The NMApplet is also per default within HD installation within the panel (left of the clock).
If you've removed it:
right mouseclick to panel => Panel Settings
within the window "Panel Preferences" => tab "Panel Applet"
=> button "Add" => select "System Tray"
-
Hello Werner, and thanks for the quick reply.
No, I didn't remove anything, and I've installed Knoppix 6.7.1 several times with the result always being the same, no nm-applet icon in the panel. Following your instructions, I find that the "System Tray" is already in the panel. In (Panel Preferences / Panel Applets) from the bottom, I have (Digital Clock, CPU Usage Monitor, System Tray. Volume Control, ...).
Some additional info: When I enter "ps aux" in a terminal session, immediately after boot, but before manually starting nm-applet, "nm-applet" DOES NOT appear in the list of processes. After I enter "nm-applet &" to manually start nm-applet, "nm-applet" DOES appear in the list of processes. Apparently, nm-applet is not being launched automatically.
Is it possible that the failure to launch nm-applet is an i586 issue?
-
OK, over the past day or so, some foggy memories have returned of having been here before. Last year, I installed Knoppix 6.7.1 on a Compaq Deskpro (Pentium II), after having Knoppix 6.7.0 installed on it, and I ran into the exact same problem. After spending too much time trying (unsuccessfully) to get the nm-applet problem sorted, I re-installed 6.7.0, which worked great, proving the problem to not be an i586 issue. Last night, I installed 6.7.0 on the Aptiva, and Voila!!!, the nm-applet problem was gone. It's NOT an i586 issue.
Now, with Knoppix 6.7.0 running great on the Aptiva, I have a different problem. I tried to install Samba, and had problem with dependencies. If there's a quick answer to this, here's the message that Synaptic returned:
samba:
Depends: samba-common (=2:3.5.6~dfsg-3squeeze7) but 2:3.5.8~dfsg-1 is to be installed
Depends: libwbclient0 (=2:3.5.6~dfsg-3squeeze7) but 2:3.5.8~dfsg-1 is to be installed
Otherwise, it's the topic of a different thread.
Werner - Thanks for trying to help..
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![ORICO 5 Bay Raid Enclosure USB3.0 SATA External Hard Drive Enclosure Up to 80TB picture](/store/img/g/m2IAAOSwmz5kyNFT/s-l225/ORICO-5-Bay-Raid-Enclosure-USB3-0-SATA-External-Ha.jpg)
ORICO 5 Bay Raid Enclosure USB3.0 SATA External Hard Drive Enclosure Up to 80TB
$115.59
![Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller picture](/store/img/g/ph8AAOSwnHxmXzcB/s-l225/Dell-EMC-092GD6-Broadcom-9305-16i-LSI-Quad-Port-4-.jpg)
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
![8 Bay Tool Less Tray Hot Swap 2.5](/store/img/g/3qgAAOSwoa9mfrgW/s-l225/8-Bay-Tool-Less-Tray-Hot-Swap-2-5-3-5-SATA-Non-RAI.jpg)
8 Bay Tool Less Tray Hot Swap 2.5" 3.5" SATA Non RAID Ext USB 3.0 Enclosure USED
$145.00
![OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire picture](/store/img/g/-FoAAOSwtEBmQ5qa/s-l225/OWC-Guardian-Maximus-Raid-Enclosure-SATA-Hard-Driv.jpg)
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
![ASUS Hyper M.2 x16 Gen 4 RAID Card- Used Working picture](/store/img/g/fGwAAOSwAStmfi9c/s-l225/ASUS-Hyper-M-2-x16-Gen-4-RAID-Card-Used-Working.jpg)
ASUS Hyper M.2 x16 Gen 4 RAID Card- Used Working
$32.95
![Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile picture](/store/img/g/C7YAAOSwLYJl3nQQ/s-l225/Dell-PERC-H330-PCIe-3-0-x8-RAID-Storage-Controller.jpg)
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$17.99
![Broadcom LSI 9400-16i Raid card SAS/SATA/NVME SFF-8643 SAS3416 PCIe 3.1 x8 HBA picture](/store/img/g/SM4AAOSwsEVmhD1K/s-l225/Broadcom-LSI-9400-16i-Raid-card-SAS-SATA-NVME-SFF-.jpg)
Broadcom LSI 9400-16i Raid card SAS/SATA/NVME SFF-8643 SAS3416 PCIe 3.1 x8 HBA
$95.00
![LSI 8 Port 6Gbps PCIe 3.0 External SAS RAID Card w/ 1GB CacheVault & Low Profile picture](/store/img/g/3oUAAOSweflmcp0x/s-l225/LSI-8-Port-6Gbps-PCIe-3-0-External-SAS-RAID-Card-w.jpg)
LSI 8 Port 6Gbps PCIe 3.0 External SAS RAID Card w/ 1GB CacheVault & Low Profile
$29.00
![ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT picture](/store/img/g/m2IAAOSwmz5kyNFT/s-l225/ORICO-5-Bay-Raid-USB3-0-to-SATA-External-Hard-Driv.jpg)
ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT
$134.39
![Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5](/store/img/g/izoAAOSwfCZlZs9y/s-l225/Yottamaster-5-Bay-RAID-Hard-Drive-Enclosure-Type-C.jpg)
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$139.99