Results 1 to 4 of 4

Thread: Automatically Start nm-applet After HD Install...

  1. #1
    Junior Member
    Join Date
    May 2012
    Posts
    4

    Question Automatically Start nm-applet After HD Install...

    I just installed Knoppix 6.7.1 to HDD from a Live CD. While using the Live CD, The Network Manager's nm-applet places an icon in the panel, but after installing, the nm-applet icon is NOT in the panel. It appears that nm-applet isn't loaded in the case of a full install. I can load nm-applet by going to a terminal session and entering "nm-applet &", which will then place the applet's icon in the panel, with all working normally afterward. But, I want it to work the same as the Live CD.

    Question: How do I get nm-applet to load automatically?
    __________________________________________________ _

    IBM Aptiva, AMD K6 266MHz, 256Mb Memory, 15Gb HD, D-Link G122 USB Wireless

  2. #2
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    The NMApplet is also per default within HD installation within the panel (left of the clock).

    If you've removed it:
    right mouseclick to panel => Panel Settings
    within the window "Panel Preferences" => tab "Panel Applet"
    => button "Add" => select "System Tray"

  3. #3
    Junior Member
    Join Date
    May 2012
    Posts
    4
    Hello Werner, and thanks for the quick reply.

    No, I didn't remove anything, and I've installed Knoppix 6.7.1 several times with the result always being the same, no nm-applet icon in the panel. Following your instructions, I find that the "System Tray" is already in the panel. In (Panel Preferences / Panel Applets) from the bottom, I have (Digital Clock, CPU Usage Monitor, System Tray. Volume Control, ...).

    Some additional info: When I enter "ps aux" in a terminal session, immediately after boot, but before manually starting nm-applet, "nm-applet" DOES NOT appear in the list of processes. After I enter "nm-applet &" to manually start nm-applet, "nm-applet" DOES appear in the list of processes. Apparently, nm-applet is not being launched automatically.

    Is it possible that the failure to launch nm-applet is an i586 issue?

  4. #4
    Junior Member
    Join Date
    May 2012
    Posts
    4
    OK, over the past day or so, some foggy memories have returned of having been here before. Last year, I installed Knoppix 6.7.1 on a Compaq Deskpro (Pentium II), after having Knoppix 6.7.0 installed on it, and I ran into the exact same problem. After spending too much time trying (unsuccessfully) to get the nm-applet problem sorted, I re-installed 6.7.0, which worked great, proving the problem to not be an i586 issue. Last night, I installed 6.7.0 on the Aptiva, and Voila!!!, the nm-applet problem was gone. It's NOT an i586 issue.

    Now, with Knoppix 6.7.0 running great on the Aptiva, I have a different problem. I tried to install Samba, and had problem with dependencies. If there's a quick answer to this, here's the message that Synaptic returned:

    samba:
    Depends: samba-common (=2:3.5.6~dfsg-3squeeze7) but 2:3.5.8~dfsg-1 is to be installed
    Depends: libwbclient0 (=2:3.5.6~dfsg-3squeeze7) but 2:3.5.8~dfsg-1 is to be installed

    Otherwise, it's the topic of a different thread.

    Werner - Thanks for trying to help..

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Tenda 8/5 Port Gigabit Ethernet Splitter Network Switch SG108 / SG105 Unmanaged picture

Tenda 8/5 Port Gigabit Ethernet Splitter Network Switch SG108 / SG105 Unmanaged

$19.99



Tenda SG105 5-Port 10/100/1000Mbps Gigabit Desktop Switch Ethernet Splitter Hub picture

Tenda SG105 5-Port 10/100/1000Mbps Gigabit Desktop Switch Ethernet Splitter Hub

$13.99



Tenda SG108 Network Gigabit Switch 8 Port 10/100/1000Mbps Wired Ethernet Lan Hub picture

Tenda SG108 Network Gigabit Switch 8 Port 10/100/1000Mbps Wired Ethernet Lan Hub

$19.99



New Linksys SE3005 5-port Gigabit Ethernet Switch picture

New Linksys SE3005 5-port Gigabit Ethernet Switch

$15.99



NETGEAR 8-Port Gigabit Ethernet Unmanaged Switch (GS308) - Home Network Hub, Off picture

NETGEAR 8-Port Gigabit Ethernet Unmanaged Switch (GS308) - Home Network Hub, Off

$21.99



New 10/100 Mbps 8 Ports Fast Ethernet LAN Desktop RJ45 Network Switch Hub picture

New 10/100 Mbps 8 Ports Fast Ethernet LAN Desktop RJ45 Network Switch Hub

$11.49



NETGEAR GS305-300PAS 5-port Gigabit Ethernet Unmanaged Switch (GS305) picture

NETGEAR GS305-300PAS 5-port Gigabit Ethernet Unmanaged Switch (GS305)

$17.99



Brocade ICX 6430-C12 Network Switch (14+ PoE)  picture

Brocade ICX 6430-C12 Network Switch (14+ PoE)

$87.88



8 Port PoE Switch With 2 Uplink 120W Extend to 250Meter Unmanaged 803.af/at picture

8 Port PoE Switch With 2 Uplink 120W Extend to 250Meter Unmanaged 803.af/at

$39.99



 NETGEAR 8-Port Gigabit Ethernet Unmanaged Switch (GS308) - Home Network Hub, Of picture

NETGEAR 8-Port Gigabit Ethernet Unmanaged Switch (GS308) - Home Network Hub, Of

$28.73