Results 1 to 4 of 4

Thread: Automatically Start nm-applet After HD Install...

  1. #1
    Junior Member
    Join Date
    May 2012
    Posts
    4

    Question Automatically Start nm-applet After HD Install...

    I just installed Knoppix 6.7.1 to HDD from a Live CD. While using the Live CD, The Network Manager's nm-applet places an icon in the panel, but after installing, the nm-applet icon is NOT in the panel. It appears that nm-applet isn't loaded in the case of a full install. I can load nm-applet by going to a terminal session and entering "nm-applet &", which will then place the applet's icon in the panel, with all working normally afterward. But, I want it to work the same as the Live CD.

    Question: How do I get nm-applet to load automatically?
    __________________________________________________ _

    IBM Aptiva, AMD K6 266MHz, 256Mb Memory, 15Gb HD, D-Link G122 USB Wireless

  2. #2
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    The NMApplet is also per default within HD installation within the panel (left of the clock).

    If you've removed it:
    right mouseclick to panel => Panel Settings
    within the window "Panel Preferences" => tab "Panel Applet"
    => button "Add" => select "System Tray"

  3. #3
    Junior Member
    Join Date
    May 2012
    Posts
    4
    Hello Werner, and thanks for the quick reply.

    No, I didn't remove anything, and I've installed Knoppix 6.7.1 several times with the result always being the same, no nm-applet icon in the panel. Following your instructions, I find that the "System Tray" is already in the panel. In (Panel Preferences / Panel Applets) from the bottom, I have (Digital Clock, CPU Usage Monitor, System Tray. Volume Control, ...).

    Some additional info: When I enter "ps aux" in a terminal session, immediately after boot, but before manually starting nm-applet, "nm-applet" DOES NOT appear in the list of processes. After I enter "nm-applet &" to manually start nm-applet, "nm-applet" DOES appear in the list of processes. Apparently, nm-applet is not being launched automatically.

    Is it possible that the failure to launch nm-applet is an i586 issue?

  4. #4
    Junior Member
    Join Date
    May 2012
    Posts
    4
    OK, over the past day or so, some foggy memories have returned of having been here before. Last year, I installed Knoppix 6.7.1 on a Compaq Deskpro (Pentium II), after having Knoppix 6.7.0 installed on it, and I ran into the exact same problem. After spending too much time trying (unsuccessfully) to get the nm-applet problem sorted, I re-installed 6.7.0, which worked great, proving the problem to not be an i586 issue. Last night, I installed 6.7.0 on the Aptiva, and Voila!!!, the nm-applet problem was gone. It's NOT an i586 issue.

    Now, with Knoppix 6.7.0 running great on the Aptiva, I have a different problem. I tried to install Samba, and had problem with dependencies. If there's a quick answer to this, here's the message that Synaptic returned:

    samba:
    Depends: samba-common (=2:3.5.6~dfsg-3squeeze7) but 2:3.5.8~dfsg-1 is to be installed
    Depends: libwbclient0 (=2:3.5.6~dfsg-3squeeze7) but 2:3.5.8~dfsg-1 is to be installed

    Otherwise, it's the topic of a different thread.

    Werner - Thanks for trying to help..

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller Both brackets picture

IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller Both brackets

$139.00



LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA picture

LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA

$229.99



XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT picture

XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT

$59.00



HPE 869102-001 Smart Array E208i-a SR Gen10 Storage Controller RAID SP: 871039 picture

HPE 869102-001 Smart Array E208i-a SR Gen10 Storage Controller RAID SP: 871039

$129.99



Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE picture

Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE

$15.98



LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License picture

LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License

$35.96



ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs picture

ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs

$86.99



LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault picture

LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault

$39.00



Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5

Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5"/3.5" SATA HDD SSD

$142.49



ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID picture

ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID

$58.99