-
Junior Member
registered user
Pxe boot with Broadcom BCM5754 does not work
I am using Knoppix 6.7.0 in a PXE boot environment. I have remastered it a little bit to remove some packages and whatnot, but it's pretty vanilla. It's been working fine for a few months now, on lots of different hardwares.
I am having a problem with PXE booting a Dell 740 which has a Broadcom BCM5754 Gigabit card. I believe the problem is the firmware for the card, although I don't know. I can boot the machine using the Knoppix 6.7.0 CD, and it loads the NIC driver fine.
The exact behavior is this: I do the PXE boot, and it loads the minirt.gz image. I see kernel loading lines flash through the screen very very quickly, and then the machine reboots. It appears to be rebooting at the point it's trying to execute udhcp. I can't say with certainty because it is rebooting so fast. Sometimes so fast I barely see the kernel lines show up.
I booted to cd (also Knoppix 6.7.0) to diagnose what modules are loaded etc, and found that the tg3.ko module has 3 firmware files it loads. Those files are not in the minirt.gz packing. (but they are on the cd). So i copied the /lib/firmware folder to the minirt.gz, but it is not working. I then found a post on writing a custom hotplug script in /sbin/hotplug to load the firmware, but that does not seem to be executing, or if it is, it is not working. The article I found targeted Knoppix 5, so maybe it's not applicable anymore. (i tried to put an echo and a sleep to test, but for all i know it's in a background thread)
While I was at it, I modified the init script to not call the restart command in the bailout() function.
this does not stop the machine from rebooting!
I am at a loss as to how to diagnose this. It works from CD but not PXE, which shouts NIC, but I just don't know. I've tried removing the driver altogether to see if the script will pause and complain about no network / driver etc. No joy.
Any one have any ideas on how to approach this?
-
Junior Member
registered user
I booted to the CD and did a lsmod to get a list of everything. Then I used modinfo to go through the list for dependencies.
I then copied all of the .ko files to a drivers folder and renamed them to go in order. (ie, 0_ttm.ko, so that the nouveau.ko file can load).
I repacke the initram and rebooted, and this time the screen locks up with what looks like a kernel panic screen. This makes me feel like I'm moving in the right direction, but ... well, I put all of the kernel modules that I saw in /proc/modules. So I'm stumped again.
-
Junior Member
registered user
So i figured it out. and it makes no sense to me..
Somehow a while ago (like 5 months) I must have made a typeo when creating my customzed initrd. (this was when I was fixing the broadcomm b44.ko driver to work)
The root of the minirt.gz had a file called ..miniroot
I found it by accident. Once I removed that file and re-created the pxe minirt.gz it worked fine.
I don't understand how just this one model of machine broke, or even why it broke. but it's fixed now.
chalk this up to PEBKAC
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Gigabyte Z370P D3 ATX Z370 LGA1151 Motherboard (Support Intel 6/7th 8th 9th) picture](/store/img/g/QrkAAOSwMGNmLxf0/s-l225/Gigabyte-Z370P-D3-ATX-Z370-LGA1151-Motherboard-Sup.jpg)
Gigabyte Z370P D3 ATX Z370 LGA1151 Motherboard (Support Intel 6/7th 8th 9th)
$59.99
![ASRock B550M Pro SE AM4 DDR4 SATA 6Gb/s 1 PCIe 4.0 x16 Micro ATX Motherboard picture](/store/img/g/oXIAAOSwCn1k30lD/s-l225/ASRock-B550M-Pro-SE-AM4-DDR4-SATA-6Gb-s-1-PCIe-4-0.jpg)
ASRock B550M Pro SE AM4 DDR4 SATA 6Gb/s 1 PCIe 4.0 x16 Micro ATX Motherboard
$84.99
![ASUS H110M-R Motherboard Intel 6th/7th Gen LGA1151 DDR4 Micro-ATX i/o shield picture](/store/img/g/FhQAAOSwzL9iDqc3/s-l225/ASUS-H110M-R-Motherboard-Intel-6th-7th-Gen-LGA1151.jpg)
ASUS H110M-R Motherboard Intel 6th/7th Gen LGA1151 DDR4 Micro-ATX i/o shield
$42.00
![MSI H110M pro-vd 6th/7th Gen Intel DDR4 MATX Motherboard NO I/O SHIELD picture](/store/img/g/jNYAAOSwCJdmeF7y/s-l225/MSI-H110M-pro-vd-6th-7th-Gen-Intel-DDR4-MATX-Mothe.jpg)
MSI H110M pro-vd 6th/7th Gen Intel DDR4 MATX Motherboard NO I/O SHIELD
$35.00
![Asus H81M-C Intel LGA1150 DDR3 Desktop Motherboard MicroATX Socket H3 picture](/store/img/g/CZ4AAOSwg8pmYirU/s-l225/Asus-H81M-C-Intel-LGA1150-DDR3-Desktop-Motherboard.jpg)
Asus H81M-C Intel LGA1150 DDR3 Desktop Motherboard MicroATX Socket H3
$23.99
![Asus Prime H310M-A R2.0 Intel LGA 1151 DDR4 Desktop Motherboard picture](/store/img/g/ld0AAOSw7q5mV2ql/s-l225/Asus-Prime-H310M-A-R2-0-Intel-LGA-1151-DDR4-Deskto.jpg)
Asus Prime H310M-A R2.0 Intel LGA 1151 DDR4 Desktop Motherboard
$54.99
![MSI H81I LGA1150 MINI-ITX DDR3 Desktop Motherboard With I/O Shield picture](/store/img/g/TGIAAOSwpzNiJ8-i/s-l225/MSI-H81I-LGA1150-MINI-ITX-DDR3-Desktop-Motherboard.jpg)
MSI H81I LGA1150 MINI-ITX DDR3 Desktop Motherboard With I/O Shield
$32.99
![GIGABYTE GA-X99-UD4P MOTHERBOARD, M.2 SATA3, LGA2011-3, DDR4, & I/O Shield picture](/store/img/g/ZI0AAOSwKLBmV33e/s-l225/GIGABYTE-GA-X99-UD4P-MOTHERBOARD-M-2-SATA3-LGA2011.jpg)
GIGABYTE GA-X99-UD4P MOTHERBOARD, M.2 SATA3, LGA2011-3, DDR4, & I/O Shield
$69.99
![Gigabyte M-ATX motherboard with Intel Core i3 8100 CPU and 8GB DDR4 RAM picture](/store/img/g/CCsAAOSw9mtkQuoe/s-l225/Gigabyte-M-ATX-motherboard-with-Intel-Core-i3-8100.jpg)
Gigabyte M-ATX motherboard with Intel Core i3 8100 CPU and 8GB DDR4 RAM
$84.00
![ASUS PRIME Z270-P Motherboard || Kit with/ Intel G3900 and 4 GB RAM picture](/store/img/g/D0AAAOSw5qVmcdTF/s-l225/ASUS-PRIME-Z270-P-Motherboard-Kit-with-Intel-G3900.jpg)
ASUS PRIME Z270-P Motherboard || Kit with/ Intel G3900 and 4 GB RAM
$36.59