-
Running without HD
I want to run Knoppix on my laptop without a hard drive, is this possible?
-
Yeah, it works fine. I have a box setup without a hd now, which is the box I use for my wireless networking stuff.
There's really no difference between running with or without a hd, except for storing large files. A floppy works good for the 2 config file I need.
-
Senior Member
registered user
Re: Running without HD
Originally Posted by
Levon
I want to run Knoppix on my laptop without a hard drive, is this possible?
If you have 128MB or more RAM and the laptop is supported, sure. You can then use a floppy to store your settings.
-
The laptop has about 16 megabytes RAM, what do you think?
-
Senior Member
registered user
Originally Posted by
Levon
The laptop has about 16 megabytes RAM, what do you think?
I think it will run in text-mode, but no GUI. If it really came with 16 MB, I think it's too old to run anything useful. What brand/model is it?
-
Senior Member
registered user
Originally Posted by
Levon
The laptop has about 16 megabytes RAM, what do you think?
YIKES! The only distro I know of that isn't antiquated and has X windows AND would run on 16M is mulinux
It's not terribly hard to install- it's not Knoppix but if you take your time it should work out for you. I have it on an 8M laptop and yes- it boots xwindows. More of a toy than anything tho- great project/learning experience however.
-
Junior Member
registered user
Loper said a few posts back that with out a HD Knoppix ran fine using the floppy for storage.
Which version was that 3.1 or 3.2 because I can't save my settings on 3.2? It it me or is 3.1 better than 3.2 in floppy usage?
a puzzled,
Tim
-
It can be done.
Yeah, I just booted with 'knoppix 2' from my p-100mhz with 16 megs of ram, no HD. It booted up fine, and runs fine to this day. Apache doesn't take up alot of ram!
- Ambrose
-
Senior Member
registered user
I had problems trying out the early editions of V3.2 also. I haven't tried late May or June versions yet. My problem was that I could not use CUPS. I would write some code in KATE, configure a printer in CUPS, then go to print from KATE and KDECrashHandler catches KATE!
Regards,
-
Kate seems to be a little buggy... for example...
Within a script, I call kate /var/log/iamanidiotlog
Then I execute the bash script, and it works...
If you call the script with 'sudo' first, kate crashes.
This can get quite anoying! I've just put a sudo in front of everything in my script, except for the kate part.
- Ambrose
Similar Threads
-
By linuxknewb in forum General Support
Replies: 1
Last Post: 08-21-2004, 05:37 PM
-
By Rob_S in forum MS Windows & New to Linux
Replies: 14
Last Post: 08-08-2004, 11:45 PM
-
By Raineri in forum General Support
Replies: 2
Last Post: 09-24-2003, 10:46 PM
-
By Allowee in forum Hdd Install / Debian / Apt
Replies: 9
Last Post: 04-22-2003, 06:33 AM
-
By dvessey in forum Ideas
Replies: 9
Last Post: 02-09-2003, 01:37 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x600Gb SAS, Proxmox
$340.00
Dell PowerEdge M610 Blade Server E5620@2.2GHZ (6x)8GB RAM (2x)146GB 15K SAS HDD
$75.00
CSE-118 Supermicro 1U 3x GPU Server 2.6Ghz 20-C 128GB CX353A 2x1600W PSU Rails
$454.03
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$299.99
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$275.00
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$224.99
DELL PowerEdge R730 Server 2x E5-2643v3 3.4GHz =12 Cores 64GB H730 4xRJ45
$306.00
DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 128GB H730 4xRJ45
$444.00