I had the same thing. When I tried it again it worked. I think the drive has to be unmounted.
I am trying to install to a 16GB flash drive from the live DVD with
Knoppix -> Install KNOPPIX to flash drive
The drive on /dev/sdg is formatted OK but during copying I get this error:
cp: writing `/tmp/flash-knoppix.4381.tmpmount/KNOPPIX/KNOPPIX': No space left on device cp: failed to extend `/tmp/flash-knoppix.4381.tmpmount/KNOPPIX/KNOPPIX': No space left on device
However using df I see that /tmp is no more than 1% full.
Does anyone know the cause of this error, and is there a "manual" way to install to flash drive?
cheers
Gareth
knoppix@Microknoppix:~$ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sr0 4081942 4081942 0 100% /mnt-system
tmpfs 2486272 10952 2475320 1% /ramdisk
/dev/cloop 9732726 9732726 0 100% /KNOPPIX
unionfs 2486272 10952 2475320 1% /UNIONFS
unionfs 2486272 10952 2475320 1% /usr
unionfs 2486272 10952 2475320 1% /home
tmpfs 10240 64 10176 1% /UNIONFS/var/run
tmpfs 20480 2892 17588 15% /run
tmpfs 10240 0 10240 0% /UNIONFS/var/lock
tmpfs 102400 104 102296 1% /UNIONFS/var/log
tmpfs 2097152 248 2096904 1% /tmp
udev 20480 4 20476 1% /dev
tmpfs 2097152 132 2097020 1% /dev/shm
knoppix@Microknoppix:~$ fdisk -l /dev/sdg
Disk /dev/sdg: 16.0 GB, 16008609792 bytes
255 heads, 63 sectors/track, 1946 cylinders, total 31266816 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdg1 * 63 240974 120456 c W95 FAT32 (LBA)
/dev/sdg2 240975 7132859 3445942+ 83 Linux
I had the same thing. When I tried it again it worked. I think the drive has to be unmounted.
Have you checked that you are actually doing what you think you do?
First, what do you think /tmp is actually containing?
Second, you say "formatted OK" - but what does fdisk output tell you?
Third, if copy to flash terminates correctly, how would you see the results immediately afterwards?
You definitely don't need a manual way to install to flash drive. You definitely need to use the built-in functions, at least for a while.
Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W
$329.99
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$509.99
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$174.95
DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 256GB H730 4xRJ45
$562.00
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00