Install to flash drive error

[dgwsoft]

I am trying to install to a 16GB flash drive from the live DVD with

Knoppix -> Install KNOPPIX to flash drive

The drive on /dev/sdg is formatted OK but during copying I get this error:

cp: writing `/tmp/flash-knoppix.4381.tmpmount/KNOPPIX/KNOPPIX': No space left on device cp: failed to extend `/tmp/flash-knoppix.4381.tmpmount/KNOPPIX/KNOPPIX': No space left on device

However using df I see that /tmp is no more than 1% full.

Does anyone know the cause of this error, and is there a "manual" way to install to flash drive?

cheers

Gareth


knoppix@Microknoppix:~$ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sr0 4081942 4081942 0 100% /mnt-system
tmpfs 2486272 10952 2475320 1% /ramdisk
/dev/cloop 9732726 9732726 0 100% /KNOPPIX
unionfs 2486272 10952 2475320 1% /UNIONFS
unionfs 2486272 10952 2475320 1% /usr
unionfs 2486272 10952 2475320 1% /home
tmpfs 10240 64 10176 1% /UNIONFS/var/run
tmpfs 20480 2892 17588 15% /run
tmpfs 10240 0 10240 0% /UNIONFS/var/lock
tmpfs 102400 104 102296 1% /UNIONFS/var/log
tmpfs 2097152 248 2096904 1% /tmp
udev 20480 4 20476 1% /dev
tmpfs 2097152 132 2097020 1% /dev/shm

knoppix@Microknoppix:~$ fdisk -l /dev/sdg

Disk /dev/sdg: 16.0 GB, 16008609792 bytes
255 heads, 63 sectors/track, 1946 cylinders, total 31266816 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Device Boot Start End Blocks Id System
/dev/sdg1 * 63 240974 120456 c W95 FAT32 (LBA)
/dev/sdg2 240975 7132859 3445942+ 83 Linux

[fenzda]

I had the same thing. When I tried it again it worked. I think the drive has to be unmounted.

[Capricorny]

I am trying to install to a 16GB flash drive from the live DVD with

Knoppix -> Install KNOPPIX to flash drive

The drive on /dev/sdg is formatted OK but during copying I get this error:

cp: writing `/tmp/flash-knoppix.4381.tmpmount/KNOPPIX/KNOPPIX': No space left on device cp: failed to extend `/tmp/flash-knoppix.4381.tmpmount/KNOPPIX/KNOPPIX': No space left on device

However using df I see that /tmp is no more than 1% full.

Does anyone know the cause of this error, and is there a "manual" way to install to flash drive?

cheers

Gareth


knoppix@Microknoppix:~$ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sr0 4081942 4081942 0 100% /mnt-system
tmpfs 2486272 10952 2475320 1% /ramdisk
/dev/cloop 9732726 9732726 0 100% /KNOPPIX
unionfs 2486272 10952 2475320 1% /UNIONFS
unionfs 2486272 10952 2475320 1% /usr
unionfs 2486272 10952 2475320 1% /home
tmpfs 10240 64 10176 1% /UNIONFS/var/run
tmpfs 20480 2892 17588 15% /run
tmpfs 10240 0 10240 0% /UNIONFS/var/lock
tmpfs 102400 104 102296 1% /UNIONFS/var/log
tmpfs 2097152 248 2096904 1% /tmp
udev 20480 4 20476 1% /dev
tmpfs 2097152 132 2097020 1% /dev/shm

knoppix@Microknoppix:~$ fdisk -l /dev/sdg

Disk /dev/sdg: 16.0 GB, 16008609792 bytes
255 heads, 63 sectors/track, 1946 cylinders, total 31266816 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Device Boot Start End Blocks Id System
/dev/sdg1 * 63 240974 120456 c W95 FAT32 (LBA)
/dev/sdg2 240975 7132859 3445942+ 83 Linux

Have you checked that you are actually doing what you think you do?

First, what do you think /tmp is actually containing?
Second, you say "formatted OK" - but what does fdisk output tell you?
Third, if copy to flash terminates correctly, how would you see the results immediately afterwards?

You definitely don't need a manual way to install to flash drive. You definitely need to use the built-in functions, at least for a while.