I had the same thing. When I tried it again it worked. I think the drive has to be unmounted.
I am trying to install to a 16GB flash drive from the live DVD with
Knoppix -> Install KNOPPIX to flash drive
The drive on /dev/sdg is formatted OK but during copying I get this error:
cp: writing `/tmp/flash-knoppix.4381.tmpmount/KNOPPIX/KNOPPIX': No space left on device cp: failed to extend `/tmp/flash-knoppix.4381.tmpmount/KNOPPIX/KNOPPIX': No space left on device
However using df I see that /tmp is no more than 1% full.
Does anyone know the cause of this error, and is there a "manual" way to install to flash drive?
cheers
Gareth
knoppix@Microknoppix:~$ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sr0 4081942 4081942 0 100% /mnt-system
tmpfs 2486272 10952 2475320 1% /ramdisk
/dev/cloop 9732726 9732726 0 100% /KNOPPIX
unionfs 2486272 10952 2475320 1% /UNIONFS
unionfs 2486272 10952 2475320 1% /usr
unionfs 2486272 10952 2475320 1% /home
tmpfs 10240 64 10176 1% /UNIONFS/var/run
tmpfs 20480 2892 17588 15% /run
tmpfs 10240 0 10240 0% /UNIONFS/var/lock
tmpfs 102400 104 102296 1% /UNIONFS/var/log
tmpfs 2097152 248 2096904 1% /tmp
udev 20480 4 20476 1% /dev
tmpfs 2097152 132 2097020 1% /dev/shm
knoppix@Microknoppix:~$ fdisk -l /dev/sdg
Disk /dev/sdg: 16.0 GB, 16008609792 bytes
255 heads, 63 sectors/track, 1946 cylinders, total 31266816 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdg1 * 63 240974 120456 c W95 FAT32 (LBA)
/dev/sdg2 240975 7132859 3445942+ 83 Linux
I had the same thing. When I tried it again it worked. I think the drive has to be unmounted.
Have you checked that you are actually doing what you think you do?
First, what do you think /tmp is actually containing?
Second, you say "formatted OK" - but what does fdisk output tell you?
Third, if copy to flash terminates correctly, how would you see the results immediately afterwards?
You definitely don't need a manual way to install to flash drive. You definitely need to use the built-in functions, at least for a while.
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001
$149.99
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
1U Supermicro Server X10DRU-i+ 2x Xeon E5-2690 V4 28 Cores 64GB 4x 10GBE-T 2PS
$324.00