[answering my own question] And the answer is: nofb (you have to disable framebuffer mode with wither "nofb" or "vga=normal")
Any hints on getting Knoppix to work on a Lenovo Ideapad S12 with VIA VX800 Chrome 9 video? During boot, just after chipset identification, the display goes black at the point when the boot sequence log would go into graphics mode. The system is running, because if I wait long enough I can here the audio announcing the startup sequence. Startup options I've tried with no help: no3d noacpi acpi=off screen=1280x800; screen=1280x768 vsync=60 xmodule=vesa nomodeset fb1280x800; fb1280x768
[answering my own question] And the answer is: nofb (you have to disable framebuffer mode with wither "nofb" or "vga=normal")
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
My Book Desktop Hard Drive 14TB Certified Refurbished
$193.99
DELL Hard Drive SATA 6 Gbps 8TB 512e RPM 7.2K - MG05ACA800E
$29.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
WD Ultrastar DC HC520 12TB SATA III 3.5" Enterprise HDD (HUH721212ALE600)
$100.00
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99