-
Unable to boot Knoppix 7.0 in HP Pavilion g4-1200TX Notebook PC
Hi,
I downloaded the most recent version of knoppix and tried to boot from pendrive.
When I boot it default, a black screen appears and then nothing happens.
When I boot using debug command, i get error message
"sh: can't access tty / job control off".
I tried "knoppix acpi=off nolapic hpet=off nodma" . "knoppix vga=normal" ,"knoppix xmodule=intel" but it doent helped.
I even tried "knoppix nodrm" . It doesn't gave any error but sceen hangs at a point where just cursor blinks and doesnt accept any input
Below are my system hardware configuration
System Model: HP Pavilion g4-1200TX Notebook PC
BIOS: InsydeH2O Version 03.61.01F.32
Processor: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz (4 CPUs), ~2.2GHz\
Graphics1: Radeon(TM) HD6740M
Graphics2: Intel(R) HD Graphics family
Sound Devices: Speakers and Headphones (IDT High Definition Audio CODEC)
Please help me!!! It works wonderfully in my friends' systems, I'm dying to use it.
-
Mr Abikash
I am a junior member like you.
Booting KOPPIX from pendrive supposes you have INSTALLED knoppix7 on your pendrive.
1- If so I cannot help you
2-If not you have first to INSTALL knoppix7 on your pendrive...
2a-But this also supposes you have a knoppix7_CD/DVD as a tool.
2b-If you have not such a CD/DVD you have first to burn such one from your ".ISO File" that you dowloaded.
3- I suppose your "Pavilion" authorizes "Booting from another device other than "HDD" (Look for abilities of your "BIOS").
4- I am very surprised that you have no reply because this "Forum" is very sympathic and helps very fast
5- I am rarely connected but I shall be soon for your problem.
5- Perhaps you are somewhat an expert however... so perhaps I have not understood your Post.
Greetings
Last edited by knp; 09-30-2012 at 12:33 AM.
-
I tried "knoppix acpi=off nolapic hpet=off nodma" . "knoppix vga=normal" ,"knoppix xmodule=intel" but it doent helped.
First of all trywith the CD/DVD you used for flash disk installation and with the USB stick.
-
Thanks a lot KNP and Werner for your replies. I thought I would never get any replies
@KNP
I've installed the Knoppix 7 in my pendrive from a tool. I've set the booting priority so that it boots from the pendrive. No issues with that. When the loading of drivers starts, somewhere around DRM and framebuffer, the screen goes black and nothing happens after that.
I used the same pendrive in other PC(sony vaio), it works.
I suspect there is some driver issue, though not sure. I'm very new to linux
@Werner
I tried this command "knoppix testcd". No issues with the flashdrive because the same flashdrive works in the other PC
-
Mr Abikash
"I have installed "Knop7" from a tool" as you said.Perhaps THIS tool does not
work entirely for your machine.
1-As for "Windows" partially booting takes account of "PC_material" (the
respective devices as you said also)
So it may work for one machine and not so good for another one.
Nevertheless I suppose you know much more things than me about "PC".
2- I think it is BETTER to install your "Knop_Flash" FROM the TOOLS GIVEN by the
Inventor Mr KNOPPER.
These tools are included in the "KNOP_CD_DVD" as proposed.
I installed "Knop5" sometimes on a "Fixed_HDD" a "SD_card" and an "USB_HDD" only. Not "Knop7" yet.
All went OK AUTOMATICALLY.
I suppose all this procedure is BETTER WITH "kNOP7"!...a "higher "version"
After the summer holidays you will find a good help like those of the kind "Mr Werner,Mr Utu etc..."
Greetings
knp
-
Graphics1: Radeon(TM) HD6740M
Perhaps in your case the recommendation from Klaus Knopper for a Radeon card may also be helpfull for you:
Boot with options knoppix nomodeset nocomposite
http://knopper.net/knoppix/knoppix64-en.html
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
Dell R630 8SFF 2.4Ghz 12-Core 128GB H330 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$430.04
Dell R630 8SFF 2.4Ghz 20-Core 128GB H730 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$455.04
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00
Yottamaster 4Bay RAID RGB Hard Drive Enclosure Type B Fr 2.5'' 3.5" SATA HDD SSD
$149.99