I boot knoppix via pxe. The first stages PXE gets a dhcp address almost instant. After the transfer of miniroot.gz, starting linux terminal server, ect, the udhcp version is shown and starts showing message on screen that states sending discover. At this point the nic does an down and back up link. This causes a great delay in the boot process. How can this be avoided. I configed switch Brocade to 1Gb-full-master with no success. Any ideas? Thanks greatly.
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB
$3299.99
SuperMicro X8DTT-HF+ WITH ONE XEON X5650 +24GB RAM FOR CSE-827HD-R1400B
$124.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
Dell PowerEdge M620 Blade Server
$39.99
Dell PowerEdge M620 Blade Server 2x E5-2670 2.6Ghz 16-Cores 256gb 2x 146gb 15k
$244.99