Results 1 to 8 of 8

Thread: install log location?

  1. #1
    Junior Member
    Join Date
    May 2012
    Posts
    11

    Question install log location?

    Hello. I can't seem to find the install log. I tried to install on a dell optiplex gx150 and keep getting errors. So I thought I would check the log. I can't find it. Isn't it in /var/log/ ?

  2. #2
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    First of all test the install medium (CD or DVD) with the cheatcode
    Code:
    knoppix testcd
    While booting Dell Optiplex change with [Strg Alt F12] to terminal and you'll see the bootmessages.
    I tried to install on a dell optiplex gx150 and keep getting errors.
    What errors?

  3. #3
    Junior Member
    Join Date
    May 2012
    Posts
    11
    I don't know what the errors are. That's why I want to see the log. the installer usually stops at around 7% and then it says that the installer encounted errors and that knoppix probaly isn't installed. It then gives me an okay button and I usually clckit. Then it countinues to the grub installation. I'll try to install again and give you what it says exactly.

  4. #4
    Junior Member
    Join Date
    May 2012
    Posts
    11
    this is what it says: There were errors copying KNOPPIX to hard disk. Therefore the installation is not complete. It is possible that KNOPPIX cannot be booted or that it works unreliably. Try again to copy KNOPPIX to hard disk? Yes no The disk check was clean. It also seems that the computer only has 243 MB of ram not 512 MB. I will have to upgrade that soon. The installer doesn't give me any error code so I don't know what is going wrong.

  5. #5
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Forget it; 243 MB RAM isn't enough to run Knoppix.

  6. #6
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    @ryanvade:

    You forgot to write which version of Knoppix you were trying.

    It is possible to start Knoppix 7.0.3 CD with qemu on an Windows host using 256 MB RAM for the virtual machine. Knoppix 7.0.3 uses RAM compression that should help on machines with little RAM installed. If possible, one should create a suitable swap partition on an HDD and enable it. (I don't think that it would be a good idea to use a flash device for swapping since the lifetime of flash memory is very limited regarding write operations.)

  7. #7
    Junior Member
    Join Date
    May 2012
    Posts
    11
    I'm using version 6.7.1. I cant use version 7 because it only works on DVD's. If I could put it on a cd then that would really help, the computer has no DVD drive. I do have a swap partition on the drive and it is active. I'll assume that the low memory is what keeps KNOPPIX from installing. Thank you!! although my original question wasn't answered. IS their an installation log? And if so where is it?

  8. #8
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    There is 7.0.3CD available.
    While doing the HD installing Knoppix writes a temporary logfile to '/tmp/0wn.log'.

    By default Knoppix doesn't log to '/var/log/'. If you want logging to '/var/log/' you have to rename the file '/etc/syslog-knoppix.conf' and to install "anacron".

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco SG95-16 16-Port Gigabit Switch SG95-16-KR picture

Cisco SG95-16 16-Port Gigabit Switch SG95-16-KR

$47.00



Cisco SG110 8 Port Gigabit Ethernet Switch SG110D-08-BR picture

Cisco SG110 8 Port Gigabit Ethernet Switch SG110D-08-BR

$39.00



Cisco MS120-48FP - 52 Ports Fully Managed Ethernet Switch UNCLAIMED picture

Cisco MS120-48FP - 52 Ports Fully Managed Ethernet Switch UNCLAIMED

$449.00



Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24 picture

Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24

$117.00



Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch picture

Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch

$18.99



New Linksys SE3005 5-port Gigabit Ethernet Switch picture

New Linksys SE3005 5-port Gigabit Ethernet Switch

$15.99



NETGEAR 5-Port Gigabit Ethernet Unmanaged Switch (GS305) - NEW IN BOX picture

NETGEAR 5-Port Gigabit Ethernet Unmanaged Switch (GS305) - NEW IN BOX

$18.99



Cisco WS-C3750X-48T-S 48 Port 3750X Gigabit Switch - Same Day Shipping picture

Cisco WS-C3750X-48T-S 48 Port 3750X Gigabit Switch - Same Day Shipping

$49.95



*NETGEAR PROSAFE (JGS524V2) 24-Port Gigabit Ethernet Switch *NO AC* picture

*NETGEAR PROSAFE (JGS524V2) 24-Port Gigabit Ethernet Switch *NO AC*

$29.99



Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED picture

Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED

$89.97