I would suggest that you try to boot without the 'debug' cheat code.
I have an older Dell Inspiron whose CD drive does not work, and whose bios dose not allow booting from a usb device. So, I downloaded the ADRIANE iso to the hard drive (it currently runs xubuntu) and configured grub with this boot entry:
menuentry knoppix {
loopback loop (hd0,1)/home/ADRIANE....iso
linux (loop)/boot/isolinux/linux debug nousb bootfrom=/dev/sda1/home/ADRIANE....iso expert knoppix
initrd (loop)/boot/isolinux/minirt.gz
}
When I boot the computer, Knoppix appears to boot ok --it displays a message that it finds knoppix 6 at /dev/sda1/home/.... It displays a messages that kernel 2.6.39.3 is loaded. Then it displays a message:
sh: can't access tty; job control turned off
It then displays a prompt. The hard disk is mounted at /mnt-iso. I cannot run any programs on the hard disk such as firefox. Even if I type the full path, a message is displayed that the program is not found. A character interface is displayed -- no graphical windows manager. Obviously somethins is wrong. Any ideas?
Thanks much!
I would suggest that you try to boot without the 'debug' cheat code.
Alright. It worked! I presumed that "debug" would offer something useful if the boot malfunctioned, and that it would be harmless if it functioned well. I was wrong. Thanks much for your assistance.
Cheers!
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB
$3299.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb
$599.99
UCSB-B480-M5, CISCO UCSB-B480-M5 V05 UCS B480 M5 BLADE SERVER W UCSB-MLOM-40G-03
$950.00
Cisco UCSB-B200-M4 Blade Server Chassis 73-15862-06 with back No RAM and CPU
$109.00
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
Lot of 25 Cisco UCS B200 M4 Blade Servers, 2x2680 V3, 40GbE, No Ram No HDD
$749.99
Dell PowerEdge M620 Blade Server
$39.99
UCSB-B200-M4 UCS Blade Server, 2x E5-2667 V3, 256GB RAM DDR4, 2x 300GB Drives
$299.99