I would suggest that you try to boot without the 'debug' cheat code.
I have an older Dell Inspiron whose CD drive does not work, and whose bios dose not allow booting from a usb device. So, I downloaded the ADRIANE iso to the hard drive (it currently runs xubuntu) and configured grub with this boot entry:
menuentry knoppix {
loopback loop (hd0,1)/home/ADRIANE....iso
linux (loop)/boot/isolinux/linux debug nousb bootfrom=/dev/sda1/home/ADRIANE....iso expert knoppix
initrd (loop)/boot/isolinux/minirt.gz
}
When I boot the computer, Knoppix appears to boot ok --it displays a message that it finds knoppix 6 at /dev/sda1/home/.... It displays a messages that kernel 2.6.39.3 is loaded. Then it displays a message:
sh: can't access tty; job control turned off
It then displays a prompt. The hard disk is mounted at /mnt-iso. I cannot run any programs on the hard disk such as firefox. Even if I type the full path, a message is displayed that the program is not found. A character interface is displayed -- no graphical windows manager. Obviously somethins is wrong. Any ideas?
Thanks much!
I would suggest that you try to boot without the 'debug' cheat code.
Alright. It worked! I presumed that "debug" would offer something useful if the boot malfunctioned, and that it would be harmless if it functioned well. I was wrong. Thanks much for your assistance.
Cheers!
Dell Precision T3600 | Xeon E5 | 16GB | GPU | 128GB SSD | Win 10 Pro
$115.00
CISCO MCS 7800 (2x) Intel Xeon @ 2.33 GHz 4GB Ram, NO HDD
$44.99
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
Intel SR2JT Xeon E5-2683 v4 2.10GHz 16-Core CPU Processor
$21.96
Intel Xeon E5-2680 v4 2.4GHz 35MB 14-Core 120W LGA2011-3 SR2N7
$17.99
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$39.99
Intel Xeon Gold 6126 2.6 GHz LGA 3647 Server CPU Processor SR3B3
$17.99
HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram Dual 256GB SSD K420 Linux GA
$234.98
Dell Precision Tower 7910 | 2x Intel Xeon E5-2643 V3 | 32GB RAM | No HDD | No OS
$179.95