I would suggest that you try to boot without the 'debug' cheat code.
I have an older Dell Inspiron whose CD drive does not work, and whose bios dose not allow booting from a usb device. So, I downloaded the ADRIANE iso to the hard drive (it currently runs xubuntu) and configured grub with this boot entry:
menuentry knoppix {
loopback loop (hd0,1)/home/ADRIANE....iso
linux (loop)/boot/isolinux/linux debug nousb bootfrom=/dev/sda1/home/ADRIANE....iso expert knoppix
initrd (loop)/boot/isolinux/minirt.gz
}
When I boot the computer, Knoppix appears to boot ok --it displays a message that it finds knoppix 6 at /dev/sda1/home/.... It displays a messages that kernel 2.6.39.3 is loaded. Then it displays a message:
sh: can't access tty; job control turned off
It then displays a prompt. The hard disk is mounted at /mnt-iso. I cannot run any programs on the hard disk such as firefox. Even if I type the full path, a message is displayed that the program is not found. A character interface is displayed -- no graphical windows manager. Obviously somethins is wrong. Any ideas?
Thanks much!
I would suggest that you try to boot without the 'debug' cheat code.
Alright. It worked! I presumed that "debug" would offer something useful if the boot malfunctioned, and that it would be harmless if it functioned well. I was wrong. Thanks much for your assistance.
Cheers!
JUNIPER MPC5E-40G10G MPC5E CARD 6x40GE & 24x10GE, COUIBD1BAF
$3999.99
Juniper MX-MPC2-3D-A Router Card + MIC-3D-4XGE-XFP-A & MIC-3D-20GE-SFP
$799.99
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95
Juniper QFX5110-48S-AFO Switch, 48X 1/10GBE with 4X 40/100G QSFP+ *MINOR DAMAGE*
$1299.00
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord
$54.99
EX2300-24P Juniper 24-port 10/100/1000BASE-T PoE+ 4 x 1/10GbE SFP/SFP+ UNCLAIMED
$450.00
Juniper Networks EX3400-48P 48x Gigabit PoE+ RJ45 2x 40Gb/s QSFP+ Switch
$166.24
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$41.28
Juniper EX2300-48P PoE+ Switch 48x 1GbE & 4 SFP+/SFP 10G uplinks, Tested
$289.00