While using knoppix 7.0.2, after going into "suspend" mode my system is back as it was before except for the network connectiion to the router. This is the error message I am getting when I try to get a new (or activate my old?) DHCP connection:
~Code:$ sudo netcardconfig eth0 Sending DHCP broadcast from device eth0Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:23:8b:98:6a:64 Sending on LPF/eth0/00:23:8b:98:6a:64 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 No DHCPOFFERS received. Unable to obtain a lease on first try. Exiting. Failed to bring up eth0.
How can I fix that?
~
thanks
lbrtchx
Last edited by Albretch; 08-01-2012 at 04:09 PM.
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$29.91
JUNIPER ELECTRONICS NFX250-ATT-LS1
$250.00
Juniper EX3300-48P 48-Port 10/100/1000BASE-T (48 PoE+ ports) with 4 SFP+
$74.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$59.95
Juniper Networks SRX345 Gateway Appliance
$195.00
Juniper 48-Port PoE GbE Network Switch w/ 4-Port 10GB SFP+ Module EX4300-48P
$179.99
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$140.00
Juniper EX3400-48P 48 Port Switch PoE+ 4x SFP+ 2x QSFP 1xAC *Tested/Warranty*
$139.95
Juniper EX2200-C-12T-2G Fanless 12-port Ethernet Switch with 2 SFP
$75.77
Juniper Networks SRX220 8-Port Gigabit Services Gateway Security Appliance
$45.00