Results 1 to 8 of 8

Thread: install log location?

  1. #1
    Junior Member
    Join Date
    May 2012
    Posts
    11

    Question install log location?

    Hello. I can't seem to find the install log. I tried to install on a dell optiplex gx150 and keep getting errors. So I thought I would check the log. I can't find it. Isn't it in /var/log/ ?

  2. #2
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    First of all test the install medium (CD or DVD) with the cheatcode
    Code:
    knoppix testcd
    While booting Dell Optiplex change with [Strg Alt F12] to terminal and you'll see the bootmessages.
    I tried to install on a dell optiplex gx150 and keep getting errors.
    What errors?

  3. #3
    Junior Member
    Join Date
    May 2012
    Posts
    11
    I don't know what the errors are. That's why I want to see the log. the installer usually stops at around 7% and then it says that the installer encounted errors and that knoppix probaly isn't installed. It then gives me an okay button and I usually clckit. Then it countinues to the grub installation. I'll try to install again and give you what it says exactly.

  4. #4
    Junior Member
    Join Date
    May 2012
    Posts
    11
    this is what it says: There were errors copying KNOPPIX to hard disk. Therefore the installation is not complete. It is possible that KNOPPIX cannot be booted or that it works unreliably. Try again to copy KNOPPIX to hard disk? Yes no The disk check was clean. It also seems that the computer only has 243 MB of ram not 512 MB. I will have to upgrade that soon. The installer doesn't give me any error code so I don't know what is going wrong.

  5. #5
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Forget it; 243 MB RAM isn't enough to run Knoppix.

  6. #6
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    @ryanvade:

    You forgot to write which version of Knoppix you were trying.

    It is possible to start Knoppix 7.0.3 CD with qemu on an Windows host using 256 MB RAM for the virtual machine. Knoppix 7.0.3 uses RAM compression that should help on machines with little RAM installed. If possible, one should create a suitable swap partition on an HDD and enable it. (I don't think that it would be a good idea to use a flash device for swapping since the lifetime of flash memory is very limited regarding write operations.)

  7. #7
    Junior Member
    Join Date
    May 2012
    Posts
    11
    I'm using version 6.7.1. I cant use version 7 because it only works on DVD's. If I could put it on a cd then that would really help, the computer has no DVD drive. I do have a swap partition on the drive and it is active. I'll assume that the low memory is what keeps KNOPPIX from installing. Thank you!! although my original question wasn't answered. IS their an installation log? And if so where is it?

  8. #8
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    There is 7.0.3CD available.
    While doing the HD installing Knoppix writes a temporary logfile to '/tmp/0wn.log'.

    By default Knoppix doesn't log to '/var/log/'. If you want logging to '/var/log/' you have to rename the file '/etc/syslog-knoppix.conf' and to install "anacron".

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Apple Macintosh Plus 1Mb M0001A 8MHz 128K RAM No HDD + M2706 Mouse A9M0106 Drive picture

Apple Macintosh Plus 1Mb M0001A 8MHz 128K RAM No HDD + M2706 Mouse A9M0106 Drive

$199.00



1984 APPLE MACINTOSH 128K MATCHING #'s BOX Set FIRST Model MAC M0001 NICE RARE picture

1984 APPLE MACINTOSH 128K MATCHING #'s BOX Set FIRST Model MAC M0001 NICE RARE

$7999.99



VINTAGE 1982 Apple 3 III iii 128K Computer w/ Monitor & External HD &2 Joysticks picture

VINTAGE 1982 Apple 3 III iii 128K Computer w/ Monitor & External HD &2 Joysticks

$2150.00



Original Apple Macintosh 128K M0001 Computer 1984 USA Turns on Parts or Repair picture

Original Apple Macintosh 128K M0001 Computer 1984 USA Turns on Parts or Repair

$299.00



Vintage 128K Platinum Apple IIe Computer A2S2128, Cleaned Tested Working picture

Vintage 128K Platinum Apple IIe Computer A2S2128, Cleaned Tested Working

$339.95



Apple Macintosh Reset / Programmer Switch BEIGE for Mac 128K 512k Plus picture

Apple Macintosh Reset / Programmer Switch BEIGE for Mac 128K 512k Plus

$25.00



NEW Vtg 1982 Apple 3 III iii 128K Computer A3S0128 w/ Monitor & External Drive picture

NEW Vtg 1982 Apple 3 III iii 128K Computer A3S0128 w/ Monitor & External Drive

$5000.00



Apple Macintosh M0110 Keyboard Restored & Working For Mac 128k, 512k & Plus picture

Apple Macintosh M0110 Keyboard Restored & Working For Mac 128k, 512k & Plus

$129.95



1984 Macintosh 128K MacWrite MacPaint BOX Set RARE 1st Apple Mac M0001 TESTED picture

1984 Macintosh 128K MacWrite MacPaint BOX Set RARE 1st Apple Mac M0001 TESTED

$399.99



1985 Apple 128K IIe/IIc 3.5 UniDisk Controller Card Complete In Original box picture

1985 Apple 128K IIe/IIc 3.5 UniDisk Controller Card Complete In Original box

$248.99