BTW I tried the same with kubuntu usb boot and it is working perfectly.
Hi,
I am trying to boot up my Acer Aspire 4743Z using knoppix usb boot.
However, the boot sequence stops midway leaving me with a blank screen.
I have tried to boot up with
1) knoppix vga=normal
and
2) knoppix fb800x600
with no luck.
Is there a way to resolve this?
Thanks
BTW I tried the same with kubuntu usb boot and it is working perfectly.
Which version of Knoppix do you use?
Did the boot sequence stop before the KNOPPIX file was found or after the hardware detection had finished?However, the boot sequence stops midway leaving me with a blank screen.
You could tryorCode:fb800x600at the boot prompt.Code:knoppix xmodule=vesa
DELL PowerEdge R630 8SFF Server 2x E5-2680v4 2.4GHz =28 Cores 128GB H730 4xRJ45
$394.00
DELL PowerEdge R730 Server 2x E5-2680v3 2.5GHz =24 Cores 32GB H730 4xRJ45
$247.00
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$256.99
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$171.99
HP ProLiant DL360 G9 Server 2x E5-2690v3 2.60Ghz 24-Core 256GB P440ar
$302.90
Dell PowerEdge T430 Server w/ Intel Xeon E5-2650 V4 & 1100W PSU (2X) - NO RAM
$314.99
Cisco UCS C220 M4 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB RAID-M4 4xRJ45
$244.00
Cisco UCS C240 M4 2U Server w/ 2x E5-2680v4, NO RAM
$39.99