BTW I tried the same with kubuntu usb boot and it is working perfectly.
Hi,
I am trying to boot up my Acer Aspire 4743Z using knoppix usb boot.
However, the boot sequence stops midway leaving me with a blank screen.
I have tried to boot up with
1) knoppix vga=normal
and
2) knoppix fb800x600
with no luck.
Is there a way to resolve this?
Thanks
BTW I tried the same with kubuntu usb boot and it is working perfectly.
Which version of Knoppix do you use?
Did the boot sequence stop before the KNOPPIX file was found or after the hardware detection had finished?However, the boot sequence stops midway leaving me with a blank screen.
You could tryorCode:fb800x600at the boot prompt.Code:knoppix xmodule=vesa
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2294.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB
$3299.99
Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb
$599.99
DELL POWEREDGE M620 Blade 2x Xeon E5-2670 2.5GHz 128GB 2x300GB HDD
$94.50
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
HP ProLiant BL460c G8(Gen8) 2x 8 CORE E5-2670 2.6GHz 192GB RAM 2x 146GB SAS HDD
$78.00
Dell PowerEdge M1000e (BMX01) Server Enclosure w/ 16-PowerEdge M610 Blade Server
$899.99
Dell PowerEdge M610 Blade Server E5620@2.2GHZ (6x)8GB RAM (2x)146GB 15K SAS HDD
$75.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$349.00
Dell PowerEdge M620 Blade Server
$39.99