BTW I tried the same with kubuntu usb boot and it is working perfectly.
Hi,
I am trying to boot up my Acer Aspire 4743Z using knoppix usb boot.
However, the boot sequence stops midway leaving me with a blank screen.
I have tried to boot up with
1) knoppix vga=normal
and
2) knoppix fb800x600
with no luck.
Is there a way to resolve this?
Thanks
BTW I tried the same with kubuntu usb boot and it is working perfectly.
Which version of Knoppix do you use?
Did the boot sequence stop before the KNOPPIX file was found or after the hardware detection had finished?However, the boot sequence stops midway leaving me with a blank screen.
You could tryorCode:fb800x600at the boot prompt.Code:knoppix xmodule=vesa
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$74.99
WD4000FYYZ Western Digital 4TB SATA 3.5 Hard Drive
$149.99
Western Digital WD60PURZ 6TB Hard Drive SATA6 Gb/s 64MB Cache 3.5 Inch
$109.99
WF12F DELL 1TB 7.2K 6GBPS SATA 2.5'' HDD HARD DRIVE ST91000640NS 0WF12F
$25.00
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$82.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
2 PACK Seagate ST1000LM035 Mobile HDD 1TB 2.5" SATA III Laptop Hard Drive
$27.25
Western Digital WD5000LPLX 500GB 2.5" SATA 32MB 6Gb/s 7200RPM Laptop Hard Drive
$7.99
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$174.99
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$28.45