BTW I tried the same with kubuntu usb boot and it is working perfectly.
Hi,
I am trying to boot up my Acer Aspire 4743Z using knoppix usb boot.
However, the boot sequence stops midway leaving me with a blank screen.
I have tried to boot up with
1) knoppix vga=normal
and
2) knoppix fb800x600
with no luck.
Is there a way to resolve this?
Thanks
BTW I tried the same with kubuntu usb boot and it is working perfectly.
Which version of Knoppix do you use?
Did the boot sequence stop before the KNOPPIX file was found or after the hardware detection had finished?However, the boot sequence stops midway leaving me with a blank screen.
You could tryorCode:fb800x600at the boot prompt.Code:knoppix xmodule=vesa
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller
$22.75
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
LSI MegaRaid 9361-8i 12Gbps SAS / SATA Raid Controller PCIe x8 3.0 Tested
$29.00