BTW I tried the same with kubuntu usb boot and it is working perfectly.
Hi,
I am trying to boot up my Acer Aspire 4743Z using knoppix usb boot.
However, the boot sequence stops midway leaving me with a blank screen.
I have tried to boot up with
1) knoppix vga=normal
and
2) knoppix fb800x600
with no luck.
Is there a way to resolve this?
Thanks
BTW I tried the same with kubuntu usb boot and it is working perfectly.
Which version of Knoppix do you use?
Did the boot sequence stop before the KNOPPIX file was found or after the hardware detection had finished?However, the boot sequence stops midway leaving me with a blank screen.
You could tryorCode:fb800x600at the boot prompt.Code:knoppix xmodule=vesa
Dell PowerEdge FX2S FC830 Blade Server Chassis Enclosure 2*2000W PSU NO BLADES
$299.99
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$44.99
Dell PowerEdge M620 Blade Server 2x 10C E5-2690v2 64GB Ram 2x 600GB 10k HDD
$125.00
Cisco UCSB-B200-M5 Barebones CTO Blade Server No RAM, No CPU, No HD
$287.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Dell PowerEdge M520 Blade Server Xeon E5-2403 NO HDD NO RAM
$40.00
Dell PowerEdge FC830 8-SFF 4*Xeon E5-4669v3 2.1GHz No HDD/RAM Blade Server Node
$199.99
Dell PowerEdge M610 Blade Server E5620@2.2GHZ (6x)8GB RAM (2x)146GB 15K SAS HDD
$79.00
HP ProLiant BL460c Gen9 Blade 2x E5-2690v4 2.6GHz =28 Cores 32GB P246 650FLB
$219.00
DELL PowerEdge M630 Blade 2x E5-2687Wv3 3.1GHz =20 Cores 256GB H330 2x10Gb X520
$413.00