Greetings, Karibu.
You might give /etc/rc.local a try.
Things here apply after all other initialization is over, allegedly.
Hi, I have a quick Question:
Which is the correct location to put a shell script in order to get it started at boot?
I tried /etc/init.d but it didn't work.
The script I want to start is lxdeDefaultScreenlayout for my dual monitor system, which was generated with 'exit
arandr'.
Last edited by Karibu; 09-10-2012 at 07:35 PM.
Greetings, Karibu.
You might give /etc/rc.local a try.
Things here apply after all other initialization is over, allegedly.
Greetings, Karibu!
The boot process of Knoppix consists of several steps like finding the Knoppix directory, building up of the union file system, detection of hardware components, starting the desktop environment. At all times there are means to run a shell script in addition to the usual ones delivered with Knoppix.
If you want to start a service you would use the /etc/rc.local configuration file. If you need to run a script at the end of /etc/init.d/knoppix-autoconfig you can create a file knoppix.sh in the KNOPPIX directory. If you want to run a shell script after the setup of the desktop environment you can put that script in the directory /usr/local/bin and create a suitable .desktop file in the directory /home/knoppix/.config/autostart. Configuration files for the X server are usually put in a subdirectory of /etc/X11.
Greetings, Klaus2008.
I'm going to frame Post #3 over my workplace.
Thanks for that jewel.
Thank you Klaus for the Info... It is a bit to high for me...
runing in the Terminal 'arandr' gives me a script which configures my two-monitor system.
I want this have executed automatically with each start/restart..#!/bin/sh
xrandr --output VGA-0 --mode 1920x1080 --pos 0x0 --rotate normal
--output DVI-0 --mode 1920x1080 --pos 1920x0 --rotate normal
I put the file in the locations
- /home/knoppix/.config/autostart
- /etc/X11/Xsession.d
- /usr/local/bin
but none worked. What do I have to do?
I think that you should create a small file /home/knoppix/.config/autostart/lxdeDefaultScreenlayout.desktop with the following content:The owner of the .desktop file should be knoppix.Code:[Desktop Entry] Name=lxdeDefaultScreenlayout Type=Application Exec=sudo /usr/local/bin/lxdeDefaultScreenlayout Terminal=false
There is a thread 'How to autorun a X program' where you can find a link to the 'Desktop Entry Specification'.
Issue SOLVED...
It works as expected...
Thank you Klaus for your outstanding support![]()
Dell PowerEdge FC830 8-SFF 4*Xeon E5-4669v3 2.1GHz No HDD/RAM Blade Server Node
$179.99
Dell PowerEdge FX2S 4 Slot Blade Chassis - CMC, 2x 2400W PSU
$299.00
HP ProLiant BL460c Gen9 Blade 2x E5-2699v3 2.3GHz =36 Cores 128GB P246 650FLB
$273.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$44.99
Dell PowerEdge M620 Blade Server
$39.99
Dell PowerEdge M620 CTO Blade Server (for M1000e or VRTX) 32GB(4x8GB RAM) No HDD
$72.16
Dell VRTX 25 Bay SFF with 4 x M630 With (2) E5-2690 V4's 32GB Ram
$999.99
DELL PowerEdge M630 Blade 2x E5-2680v4 2.4GHz =28 Cores 128GB H330 2x10Gb X520
$227.00
DELL PowerEdge M630 Blade 2x E5-2690v4 2.6GHz =28 Cores 128GB H330 2x10Gb X520
$283.00