Results 1 to 6 of 6

Thread: wrong keyboard -- please help

  1. #1
    Junior Member
    Join Date
    Nov 2012
    Posts
    2

    wrong keyboard -- please help

    Greetings,

    In spite of my mewbee status my earlier recolections of having once experimented an old knoppix distro which produced me a substantial surprised pleasure to deal with and this led me recently to try and succeed to install 7.04 with NO apparent problems to my happy fortune. But it did not last long. Soon i realized that through out some missed step -- i do not recall when or why -- my installation while abiding to time zone and locale (i think), did not comply keyboardwise with my hardware.
    I must declare i'm a double nationality individual: born in Portugal - portuguese father, american mother. My option, when dealing with computer matters is using English and so i selected en language for the said installation and i swear i remember to have assigned pt-latin 1 (i think) when referring my laptop keyboard...But now i'm stuck with
    a US keyboard, which is an unconfortable deficit for everyday Knoppix use.
    I' using a ZORIN 5.2 also installed distro in order to write thishere SOS: i would much appreciate if any kind soul would dedicate some minutes to teach me (a total Linux 'ignoramus') a not so difficult way to change keyboard definition within installed Knoppix 7.04.
    I'm sorry to highlight again: it wil have to assume a very step-by-step, clear format or
    else i will not be able to execute it.
    I hope i' m not condemned to re-install knoppix on account of this issue.
    Thanks for your possible attention and assistance.
    Kind regards.

  2. #2
    Junior Member
    Join Date
    Nov 2012
    Posts
    2
    Thanks for your attention: it has been most enlightning.

    I reformated to reiserfs the knoppix partition. And very attentively attempted correctly re-installed KNOPPIX 7.04 in its own previous partition. Since the very beginning when after having intended boot with lang=pt; where i was imediately informed
    PT option was NOT available, i persisted and insisted in my re-installment. And the fact was that IT DID NOT EVEN ASKED
    about my ID (name or user name password for user or password for root -- nothing! But it installed the very same version:
    us keyboard. After intensive research, I tried sudo dpkg -reconfigure-keyboard-configuration and sudo nano/etc/defaultkeyboard in order gto replace XKBLAYOUT="us" to "pt" only to learn that Knoppix does not accept such a change!

    So i'm left just one final option: once KNOPPIX does not care about PT, i choose not to care about knoppix anymore.
    I bid you farewell.

  3. #3
    Junior Member
    Join Date
    Oct 2012
    Posts
    9
    Does the knoppix cheat codes not work? http://smtp.knoppix.net/wiki/Cheat_Codes

    ### Language/Country ###
    knoppix lang=ch|cn|de|da|es|fr|it specify language/keyboard
    knoppix lang=nl|pl|ru|sk|tr|tw|us specify language/keyboard
    knoppix keyboard=us xkeyboard=us Use different keyboard (text/X)
    knoppix utc Use Universal Time [Hint: 1]
    knoppix tz=Europe/Berlin Use this timezone for TZ
    (default: tz=localtime)

    I find that these re limited for the CD version, as it comes with a lot less. The DVD version seems to have every program ever invented by man since the beginning of time pre-installed!

  4. #4
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Greetings pastabake.

    hneves only stuck around for only 26 hours before he bid us farewell.
    I think his problem was that syslinux didn't handle reiserfs. See
    http://knoppix.net/forum/threads/145...serfs-any-idea

    Now, Knoppix 7.0.5 has grub rather than syslinux and handles
    reiserfs ok. He might benefit from your insights now, if he were
    to return.

    I, too, prefer the CD-size Knoppixes, but I'm resisting grub.

  5. #5
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Now, Knoppix 7.0.5 has grub rather than syslinux and handles
    reiserfs ok.
    Why do you think so? I can only see HD installation is using grub as in earlier versions.

  6. #6
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Quote Originally Posted by Werner P. Schulz View Post
    Why do you think so?
    Greetings, Werner.
    My current 7.0.5 cd-size LiveUSB made with flash-disk2 is just made that way.
    Must be KK's work, cause I wouldn't be able to do that on my own.

    Grub looks complicated relative to syslinux. I guessed that from
    the 2003 link it was necessary because of reiserfs. Since minirt.gz
    might handle the situation, I'd be pleased to see the problem
    solved there rather than complicate the boot process.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell Precision T3600 XEON E5-1607 3.0GHz 16GB RAM 500GB HD WIN10 Pro Workstation picture

Dell Precision T3600 XEON E5-1607 3.0GHz 16GB RAM 500GB HD WIN10 Pro Workstation

$99.00



HP Z2 Mini G3 Workstation Xeon E3-1225 V5 8GB RAM 256GB SSD Used No OS picture

HP Z2 Mini G3 Workstation Xeon E3-1225 V5 8GB RAM 256GB SSD Used No OS

$140.00



Intel Xeon E5-2697 v4 2.3GHz 18-Core Processor CPU LGA2011 SR2JV picture

Intel Xeon E5-2697 v4 2.3GHz 18-Core Processor CPU LGA2011 SR2JV

$49.99



Cisco UCS C220 M4 1x Xeon E5-2667 V4 3.20GHZ 128GB DDR4-2400MHZ 2x 770W AC PSU picture

Cisco UCS C220 M4 1x Xeon E5-2667 V4 3.20GHZ 128GB DDR4-2400MHZ 2x 770W AC PSU

$129.99



SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 Grade A Processor picture

SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 Grade A Processor

$3.96



Intel Xeon E5-2699 v3 2.3GHz 18-Core 45MB 145W LGA2011-3 CPU/Processor SR1XD picture

Intel Xeon E5-2699 v3 2.3GHz 18-Core 45MB 145W LGA2011-3 CPU/Processor SR1XD

$40.99



Genuine Intel Xeon E5-2680V4 2.40Ghz 14-Core 35MB LGA2011 CPU P/N: SR2N7 picture

Genuine Intel Xeon E5-2680V4 2.40Ghz 14-Core 35MB LGA2011 CPU P/N: SR2N7

$14.99



Intel Xeon E5-2690 v2 10-Core 3.0GHz 25M 8GTs LGA2011 Server CPU Processor SR1A5 picture

Intel Xeon E5-2690 v2 10-Core 3.0GHz 25M 8GTs LGA2011 Server CPU Processor SR1A5

$17.99



Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W picture

Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W

$299.99



Intel Xeon E5-2667 V4 SR2P5 (3.2GHZ/8-CORE/25MB/135W) PROCESSOR CPU picture

Intel Xeon E5-2667 V4 SR2P5 (3.2GHZ/8-CORE/25MB/135W) PROCESSOR CPU

$28.99