Results 1 to 6 of 6

Thread: wrong keyboard -- please help

  1. #1
    Junior Member
    Join Date
    Nov 2012
    Posts
    2

    wrong keyboard -- please help

    Greetings,

    In spite of my mewbee status my earlier recolections of having once experimented an old knoppix distro which produced me a substantial surprised pleasure to deal with and this led me recently to try and succeed to install 7.04 with NO apparent problems to my happy fortune. But it did not last long. Soon i realized that through out some missed step -- i do not recall when or why -- my installation while abiding to time zone and locale (i think), did not comply keyboardwise with my hardware.
    I must declare i'm a double nationality individual: born in Portugal - portuguese father, american mother. My option, when dealing with computer matters is using English and so i selected en language for the said installation and i swear i remember to have assigned pt-latin 1 (i think) when referring my laptop keyboard...But now i'm stuck with
    a US keyboard, which is an unconfortable deficit for everyday Knoppix use.
    I' using a ZORIN 5.2 also installed distro in order to write thishere SOS: i would much appreciate if any kind soul would dedicate some minutes to teach me (a total Linux 'ignoramus') a not so difficult way to change keyboard definition within installed Knoppix 7.04.
    I'm sorry to highlight again: it wil have to assume a very step-by-step, clear format or
    else i will not be able to execute it.
    I hope i' m not condemned to re-install knoppix on account of this issue.
    Thanks for your possible attention and assistance.
    Kind regards.

  2. #2
    Junior Member
    Join Date
    Nov 2012
    Posts
    2
    Thanks for your attention: it has been most enlightning.

    I reformated to reiserfs the knoppix partition. And very attentively attempted correctly re-installed KNOPPIX 7.04 in its own previous partition. Since the very beginning when after having intended boot with lang=pt; where i was imediately informed
    PT option was NOT available, i persisted and insisted in my re-installment. And the fact was that IT DID NOT EVEN ASKED
    about my ID (name or user name password for user or password for root -- nothing! But it installed the very same version:
    us keyboard. After intensive research, I tried sudo dpkg -reconfigure-keyboard-configuration and sudo nano/etc/defaultkeyboard in order gto replace XKBLAYOUT="us" to "pt" only to learn that Knoppix does not accept such a change!

    So i'm left just one final option: once KNOPPIX does not care about PT, i choose not to care about knoppix anymore.
    I bid you farewell.

  3. #3
    Junior Member
    Join Date
    Oct 2012
    Posts
    9
    Does the knoppix cheat codes not work? http://smtp.knoppix.net/wiki/Cheat_Codes

    ### Language/Country ###
    knoppix lang=ch|cn|de|da|es|fr|it specify language/keyboard
    knoppix lang=nl|pl|ru|sk|tr|tw|us specify language/keyboard
    knoppix keyboard=us xkeyboard=us Use different keyboard (text/X)
    knoppix utc Use Universal Time [Hint: 1]
    knoppix tz=Europe/Berlin Use this timezone for TZ
    (default: tz=localtime)

    I find that these re limited for the CD version, as it comes with a lot less. The DVD version seems to have every program ever invented by man since the beginning of time pre-installed!

  4. #4
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Greetings pastabake.

    hneves only stuck around for only 26 hours before he bid us farewell.
    I think his problem was that syslinux didn't handle reiserfs. See
    http://knoppix.net/forum/threads/145...serfs-any-idea

    Now, Knoppix 7.0.5 has grub rather than syslinux and handles
    reiserfs ok. He might benefit from your insights now, if he were
    to return.

    I, too, prefer the CD-size Knoppixes, but I'm resisting grub.

  5. #5
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Now, Knoppix 7.0.5 has grub rather than syslinux and handles
    reiserfs ok.
    Why do you think so? I can only see HD installation is using grub as in earlier versions.

  6. #6
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Quote Originally Posted by Werner P. Schulz View Post
    Why do you think so?
    Greetings, Werner.
    My current 7.0.5 cd-size LiveUSB made with flash-disk2 is just made that way.
    Must be KK's work, cause I wouldn't be able to do that on my own.

    Grub looks complicated relative to syslinux. I guessed that from
    the 2003 link it was necessary because of reiserfs. Since minirt.gz
    might handle the situation, I'd be pleased to see the problem
    solved there rather than complicate the boot process.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


DELL PowerEdge R730XD Server 2x E5-2690v4 2.6GHz =28 Cores 64GB H730 4xRJ45 picture

DELL PowerEdge R730XD Server 2x E5-2690v4 2.6GHz =28 Cores 64GB H730 4xRJ45

$387.00



Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W picture

Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W

$299.99



1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE picture

1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE

$273.00



Dell PowerEdge T420 2x Xeon E5-2430 V2 2.50GHZ 32GB DDR3-1600MHZ 2x 550W PSU picture

Dell PowerEdge T420 2x Xeon E5-2430 V2 2.50GHZ 32GB DDR3-1600MHZ 2x 550W PSU

$149.95



Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330 picture

Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330

$182.65



DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU picture

DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU

$169.95



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD

$389.99



Cisco UCS C220 M4 1x Xeon E5-2667 V4 3.20GHZ 128GB DDR4-2400MHZ 2x 770W AC PSU picture

Cisco UCS C220 M4 1x Xeon E5-2667 V4 3.20GHZ 128GB DDR4-2400MHZ 2x 770W AC PSU

$129.99



DELL PowerEdge R730 Server 2x E5-2697v4 2.3GHz =36 Cores 128GB H730 4xRJ45 picture

DELL PowerEdge R730 Server 2x E5-2697v4 2.3GHz =36 Cores 128GB H730 4xRJ45

$461.00



Cisco UCS C220 M3 1U 2x 6-Core Xeon E5-2620 2.0GHz / 64GB RAM / No HDD picture

Cisco UCS C220 M3 1U 2x 6-Core Xeon E5-2620 2.0GHz / 64GB RAM / No HDD

$89.99