Hi,
I have a P3 Dell laptop without a hard disk (malfuction of controller?) which manages to run Knoppix 7.0.4 with only 128mb of ram. I thought it is because it recognised my PCMCIA slot 5gb hard disk and used it for a swap file, but it is not being shown as a drive, and I seem to remember drives should be recognised automatically? The drive is working, it is recognised by the winxp install disk, and from win on another laptop, but the machine won't boot from it.
Is there a way to use a PCMCIA hdd from Knoppix? Is it a driver issue, or a mounting issue?
DELL PowerEdge R630 8SFF Server 2x E5-2680v4 2.4GHz =28 Cores 128GB H730 4xRJ45
$339.00
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$256.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$171.99
DELL POWEREDGE R630 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$179.95
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Dell PowerEdge R320 Single Intel Xeon E5-2430 2.20GHz 32GB ECC DDR3 RAM No HDD
$149.99
DELL PowerEdge R730 Server 2x E5-2680v3 2.5GHz =24 Cores 32GB H730 4xRJ45
$247.00
Dell PowerEdge R720 2U Server 2x Xeon E5-2670 2.60GHz 256GB RAM NO HDD NO OS
$219.99
Dell Poweredge R420 3.5" 2x Xeon E5-2430 2.2ghz 12-Cores 24gb 2x 1TB 2x 550w
$169.99